Peel & Stick PVC Edgebanding gives you a 15/16 inch wide, 0.018 inch thick white PVC edge that installs with a pressure sensitive backing, so you can cover raw edges without separate glue steps. The 600 foot roll length lets shops handle multiple cabinets or longer runs from a single roll, which helps keep edges consistent from part to part. The PVC material creates a uniform white edge, so exposed panel sides match the surface color along the run. Because the adhesive is already on the back, the band goes directly from roll to workpiece, which simplifies tool setups on small jobs. The peel and stick format works well when you need clean edges in finished spaces where spraying or brushing adhesive would slow down other trades.
This Fastcap Peel & Stick PVC Edgebanding uses a high performance pressure sensitive acrylic adhesive on the backing, which activates under pressure and increases in strength as it cures for a long lasting bond on the edge. Because the adhesive is already applied, installation becomes a press-on operation instead of a separate glue-spread process, which suits quick turnaround work and on-site adjustments. The peel-away liner exposes the acrylic adhesive only when you are ready, helping keep the bonding surface clean between cuts. As the adhesive cures after application, the bond continues to build, which supports edges that stay tight against the substrate during regular use and handling.
This PVC Edge Banding is described as good for field repairs, which means installers can use the peel and stick format to clean up chipped or unfinished edges during punch lists or service calls without bringing full edgebanding equipment on site. The product is also described as good for inside and outside radii, so the 0.018 inch PVC can follow curved edges on counter ends, cabinet gables, or specialty trim where straight rigid edges would be harder to apply. Its use as scribe tape means it can bridge small gaps at walls or ceilings, helping create a visible edge that follows out-of-plumb or uneven surfaces in built-ins. Because it is made from PVC, the banding aligns well with common laminated or coated casework materials that already use similar plastic edge details.
The high performance pressure sensitive acrylic adhesive used on this Fastcap Peel & Stick Edgebanding backs up field repairs, because the bond increases in strength as it cures and supports edges that need to stay secure after only hand pressure during installation. The 15/16 inch width gives you a slight overhang on typical 3/4 inch panels, which allows trimming back to a crisp line for both straight and curved edges without exposing the core material. The long 600 foot roll length reduces joint interruptions along edges, which can help avoid visible seams on tall cabinets or long shelving runs. Being suitable for inside and outside radii lets one product handle both straight case parts and curved details, which simplifies material choices on mixed-shape projects. Its classification as edgebanding and PVC edge banding signals it is intended as a finishing edge for panels rather than a temporary tape, so it can stay in place as part of the completed installation.
This Peel & Stick PVC Edgebanding is 15/16 inch wide, 0.018 inch thick, and supplied in a 600 foot roll, so it can cover many panel edges before you change rolls.
The high performance pressure sensitive acrylic adhesive on the backing bonds under pressure and increases in strength as it cures, supporting a long lasting edge after application.
This PVC edge banding is described as good for field repairs, so installers can cover damaged or unfinished edges on site using the peel and stick backing.
The edgebanding is described as good for inside and outside radii, so it can be applied along curved cabinet ends or rounded panels as part of the finish work.
The product is suitable for field repairs, inside and outside radii, and use as scribe tape, giving it roles on straight edges, curves, and wall scribes.
This Peel & Stick PVC Edgebanding is a Fastcap product, identified by manufacturer part number FE.SP.15/16-600.WH for easy reordering.
This Fastcap Peel & Stick PVC Edgebanding in white, 15/16 inch by 600 foot, gives shops and installers a PVC edge with factory-applied pressure sensitive acrylic adhesive, so edges for field repairs, radii, and scribe work can be applied quickly. The long roll format supports repeated use across casework projects while keeping the edge color and material consistent from part to part. For jobs that call for PVC edgebanding in a white tone with peel and stick installation, this roll aligns with that requirement and keeps the workflow straightforward.
Sold In: 1 Roll
