Company Information
Services
Approved US Government VendorCage Code: 1UXJ6
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Fastedge woodgrain PVC edgebanding is a peel and stick Manitoba Maple edge treatment that covers raw edges with a finished PVC surface, so cabinet and panel work can match Manitoba Maple designs without separate laminating steps. The 0.018 inch thick PVC construction creates a consistent, uniform edge, helping installers get a neat transition from face to edge on cabinet parts and shelving. The 15/16 inch width is sized to cover standard 3/4 inch panels with slight overhang, giving room to trim for a tight, professional-looking line. This roll length of 50 feet supports short-run work or punch list jobs without committing to oversized rolls. Because this product is made from PVC, it suits typical interior woodworking environments where stable, easy-clean edges are needed on panels, cabinet parts, and similar components.
This Fastcap peel and stick edgebanding relies on a pressure sensitive acrylic adhesive backing, so once the liner is removed, pressing the PVC into place creates the bond during edge application. Because the adhesive increases in strength as it cures, the initial placement sets the part, and bond strength develops further without additional steps, which supports efficient production or field work. The 15/16 inch width helps cover typical 3/4 inch substrates with some margin, giving room for trimming flush after the adhesive has set under normal shop or jobsite pressure.
This Fastedge woodgrain PVC peel and stick edgebanding in Manitoba Maple fits applications where exposed panel edges need to visually match Manitoba Maple surfaces. On cabinet sides, shelf fronts, or panel edges, the woodgrain PVC helps create a more continuous appearance from face to edge, which supports a finished look on casework and millwork. Because it is described as good for field repairs, installers can carry the 50 foot roll to job sites and handle chipped or unfinished edges on existing cabinetry without full shop processing. Its use on inside and outside radii lets the same material follow curved gables or rounded shelves, so curved details and straight runs can share the same Manitoba Maple edge line. When used as scribe tape, the PVC band can bridge small gaps at walls or ceilings, so installers can create a neat transition where cabinets and panels meet surrounding surfaces.
The high performance pressure sensitive acrylic adhesive on the backing increases in strength as it cures, which means that after initial placement, the bond continues to tighten, supporting long lasting adhesion along cabinet and panel edges. For everyday cabinet work, this curing behavior helps reduce the likelihood of edges lifting under normal service, which is important on frequently handled fronts and exposed shelving. The 0.018 inch thickness provides a slim PVC edge, which keeps the transition from face material to edge subtle while still covering the substrate, useful when matching laminate or similar surfacing. With a 15/16 inch width, installers gain a bit of extra coverage beyond a 3/4 inch panel face, allowing them to trim the Fastedge PVC flush for a clean, straight edge visual. The 50 foot roll length supports small to mid-size runs or multiple repair stops from a single roll, so the same product serves both production pieces and follow-up service calls.
This Fastedge woodgrain edgebanding is made from PVC, which provides a durable, uniform edge surface suitable for typical interior cabinet and panel applications.
This peel and stick edgebanding uses a pressure sensitive acrylic adhesive on the backing, so pressing it onto the edge creates the bond, and adhesive strength increases as it cures.
This Manitoba Maple PVC edgebanding is 0.018 inch thick, 15/16 inch wide, and supplied in a 50 foot roll, fitting typical 3/4 inch panel edge applications.
This Fastcap peel and stick edgebanding is described as good for field repairs, inside and outside radii, scribe tape and many other applications in cabinet and panel work.
The high performance pressure sensitive acrylic adhesive increases in strength as it cures, providing a long lasting bond along edges under normal cabinet service conditions.
This Fastedge woodgrain PVC peel and stick edgebanding roll is identified by manufacturer part number FE.WP.15/16-50.MM for ordering and job documentation.
This Fastedge woodgrain PVC peel and stick edgebanding from Fastcap combines a Manitoba Maple appearance, PVC construction, and pressure sensitive acrylic adhesive to handle common cabinet edges, field repairs, radii, and scribe tape work. The 0.018 inch thickness and 15/16 inch width suit standard 3/4 inch panel applications, while the 50 foot roll length fits shop runs and on-site tasks. For projects calling for Manitoba Maple edges with straightforward peel and stick application, this Fastedge PVC 15/16 x 50 roll offers a practical match for everyday woodworking jobs.
Sold In: 1 Roll
