Fastedge woodgrain PVC peel and stick edgebanding gives cabinet and furniture edges a Hardrock Maple finish using a pressure sensitive acrylic adhesive backing that bonds as it cures, so exposed edges gain a matching look that holds over time. The 0.018 inch thick PVC construction forms a durable edge surface that stands up to normal shop handling, which helps keep finished work looking consistent during installation and service. A 15/16 inch width works with common panel thicknesses where a slight overhang is preferred for trimming, helping installers flush the edge cleanly. The 600 foot roll length supports longer production runs or repeated repair work without frequent roll changes, which helps maintain steady workflow on site or in the shop.
The peel and stick construction puts the pressure sensitive acrylic adhesive directly on the edgebanding backing, so installation becomes a single-step apply-and-press process rather than a separate glue stage. With a 15/16 inch width, the strip overhangs typical 3/4 inch panels, giving room to trim both faces for a tight line. The 0.018 inch thickness provides a defined edge that can be trimmed and flushed without tearing, which supports crisp finishing at corners. Because the adhesive increases in strength as it cures, the bond tightens after application, which helps keep edges seated along inside and outside radii and at scribed runs.
This Fastcap FE.WP.15/16-600.HM edgebanding is identified as good for field repairs, so it suits punch-list work and on-site touchups where exposed substrate or damaged edges need a Hardrock Maple match without shop equipment. Its suitability for inside and outside radii lets it follow curved cabinet components, countertop returns, or rounded shelves, so installers can carry one woodgrain for both straight and curved details. The same product is also described as good for scribe tape use, so it can be run along panels that must be trimmed tight to walls or ceilings, helping hide cut lines with a matching Hardrock Maple face. Because the roll is 600 feet long, it fits production environments where repetitive runs on the same color are common, keeping changeovers low during casework and shelving builds.
The high performance pressure sensitive acrylic adhesive on the backing provides a long lasting bond, which matters at cabinet doors, drawer fronts, and shelves that see daily handling. As the adhesive increases in strength while it cures, initial tack holds the edgebanding in place while the bond develops, helping keep alignment along panel edges, inside corners, and outside radii. The 0.018 inch thick PVC material gives enough body to trim cleanly after application, so edges can be flushed and slightly eased without cutting through to the substrate. With a 15/16 inch width, installers gain a controlled amount of overhang on typical 3/4 inch stock, which supports precise trimming and a cleaner visual line on Hardrock Maple casework.
This Fastedge woodgrain PVC peel and stick edgebanding is 15/16 inch wide, 0.018 inch thick, and supplied in a 600 foot roll, which suits extended cabinet runs and repeated repair work.
The pressure sensitive acrylic adhesive on the backing allows quick peel and stick application, then increases in strength as it cures, so the bond tightens after edges are positioned.
This edgebanding is described as good for field repairs, inside and outside radii, scribe tape, and many other applications, which aligns with typical cabinet and furniture edge work.
The 15/16 inch width provides slight overhang on many 3/4 inch panels, giving room to trim both faces and create a clean, even edge in Hardrock Maple.
This Fastedge product is made from high quality PVC at 0.018 inch thickness, providing a durable edge surface suitable for normal woodworking environments.
The Hardrock Maple description indicates the woodgrain color and pattern, so the edgebanding visually matches Hardrock Maple panels, doors, and shelves on cabinetry projects.
This Hardrock Maple Fastedge PVC peel and stick edgebanding combines a 15/16 inch by 600 foot format with 0.018 inch thickness and a high performance pressure sensitive acrylic adhesive backing, aligning with cabinet shops and installers needing a durable, woodgrain-matched edge solution. For projects calling for Hardrock Maple faces, inside and outside radii, scribe edges, or field repairs, this Fastcap FE.WP.15/16-600.HM roll supports consistent color and workflow across multiple jobs.
Sold In: 1 Roll
