
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Knape and Vogt 12 inch drawer slides in the 8414B 12 model are full extension, hold-out ball bearing side mount slides designed for work surfaces. The full extension design lets the slide travel the entire 12 inch length, which brings work surfaces completely out for full access. The hold-out feature is designed to lock and maintain work surfaces in an extended open position, keeping a pull-out top or surface stable while in use. An unhanded side mount layout allows installation on either side, which helps simplify layout on jobs with multiple pull-outs. The zinc finish on these slides provides a clean metallic appearance that fits many cabinet interiors while matching other zinc-finished hardware in the same project.
This 8414 series slide is a side mount ball bearing slide, so it is designed to fasten along the cabinet side and the drawer or work surface side. The specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side provides a clear target width between the cabinet opening and the work surface or drawer box, which supports consistent fitting during construction. A slide height of 1-13/16 inch defines how much vertical space the slide will use on the side panel, which matters when setting the slide position relative to shelf spacing or other slides. The 32mm pattern works with system holes in cabinets built on that grid, which helps speed up installation on production jobs.
The KV Model 8414 hold-out ball bearing slide is designed for work surfaces that need to stay extended, so it suits pull-out work tops or equipment shelves that must remain open without drifting. The 12 inch length supports shallow pull-out surfaces where full extension is still needed, such as compact cabinet bays or smaller auxiliary stations. Because the slide is unhanded, the same 8414B 12 part can be mounted on the left or right side, which simplifies parts management when building multiple cabinets using the same work-surface design. The side mount configuration matches common cabinet construction where slides attach directly to cabinet sides and the side of the drawer or pull-out, so it integrates well into standard carcass layouts. The zinc finish lets these slides blend with other zinc-finished hardware in a project, which keeps a consistent hardware look inside the cabinet run. The 32mm pattern makes these slides a practical choice for cabinets drilled on that system, which helps installers align slides quickly in production or shop-built runs.
The full extension travel on the 8414B 12 slide allows the work surface or drawer to clear the cabinet front, which improves day-to-day access and reduces the need to reach into the opening. The hold-out feature is designed to lock and maintain the work surface in the extended open position, which supports steady use of tools, laptops, or other gear on the pull-out without the surface moving. Defined side clearance of 1/2 inch plus 1/32 inch minus 0 inch each side provides a tight but workable tolerance, which helps cabinetmakers cut drawer or work-surface widths that fit consistently across a project. A 1-13/16 inch slide height leaves room to position slides vertically on the drawer or surface side, which supports staggered slide placement when cabinets contain multiple pull-outs. The 32mm pattern reduces layout time in shops that drill on that spacing, because the slide holes align with system rows and allow installers to repeat the same mounting points from cabinet to cabinet. The recommended #7 x 5/8 inch Phillips pan head fasteners match the slide hole sizing, which supports a snug attachment to both cabinet and work surface members.
The 8414B 12 is a Knape and Vogt 8414 series full extension hold-out ball bearing side mount drawer slide, so it supports smooth travel with a locking extended position.
The KV 8414B 12 uses a 12 inch full extension design, so the work surface or drawer can move the full slide length for better access to the entire depth.
The 8414B 12 slide is specified for side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side, which sets the build width for the drawer or work surface.
The Knape and Vogt 8414 series slide has a height of 1-13/16 inch, which defines the vertical space it occupies along the side of the cabinet and pull-out.
The 8414B 12 drawer slide is specified for #7 x 5/8 inch Phillips pan head fasteners, which match the slide hole sizing for consistent mounting to cabinet components.
The 32mm pattern on this slide aligns with system-drilled cabinets using 32mm spacing, which supports faster installation and repeatable slide positioning on production work.
The Knape and Vogt 12 inch drawer slides 8414B 12 model provide full extension, a hold-out feature, and a defined 1/2 inch plus 1/32 inch minus 0 inch side clearance for each side. When a work surface or pull-out needs to extend fully and remain in the open position, this zinc-finished, unhanded side mount slide gives a clear set of dimensions and mounting details. For cabinets built on the 32mm pattern, these 8414 series slides offer a pattern that aligns with system drilling, supporting efficient layout across a run of work.
Sold In: 190 Set
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8401B Mfr# 8401 | Rear Mounting Bracket with Extended Rear Flange, Zinc Plated | ||||
Sold in: 1 Each | KV8402 Mfr# 8402 | Rear Mounting Bracket for 8400 Series Slides, Zinc |
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KV8404-B Mfr# 8404B | Face Frame Bracket for 8400 Slides, Front-Mount, Zinc | ||||
Sold in: 1 Each | KV8404 Mfr# 8404 | Face Frame Bracket for 8400 Series Slides, Front Mount, Zinc |