KV8414 22" Full Extension Hold-Out Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8414B 22
Description
Knape and Vogt 22 Inch Drawer Slides For Work Surfaces
Knape and Vogt 22 inch drawer slides give you a full extension slide with a hold out feature, so a work surface can extend completely and stay in the open position while you work. This 8414 Series slide is a side mount ball bearing unit, which supports smooth movement along the cabinet side for repeatable operation. The design is unhanded, so the same slide works on either side of the opening, which simplifies layout and reduces part sorting on the bench. The slide has a zinc finish, giving the steel runners a protective coating that helps the mechanism operate consistently in typical shop and cabinet environments. As a full extension slide, the 22 inch length lets the connected surface travel its full length, so the front edge clears the cabinet face and is easier to access during use.
Key 8414B 22 Details That Support Your Build
- The slide length is 22 inches, which matches a 22 inch work surface runner and lets the surface extend fully so tools or fixtures on top can clear the cabinet face.
- The 8414 Series uses ball bearing construction, which supports smooth travel along the entire stroke and gives a consistent feel when the surface is pulled in and out during repeated use.
- Side mount configuration lets the slide fasten to the cabinet sides, keeping the mechanism accessible for layout and adjustment during installation in standard framed or frameless casework.
- The slide is unhanded, so each piece can be used on the left or right side, which helps reduce stocking complexity and simplifies assembly on production or retrofit jobs.
- A zinc finish is applied to the slide members, providing a protective metallic coating that helps the moving parts run smoothly in normal woodworking shop or cabinet environments.
- The slide uses a 32mm pattern, so hole positions match standard system line boring layouts and speed up drilling, fixture setup, and repeat production runs.
Mounting And Clearance Details For 22 Inch Slides
This Knape and Vogt 8414B 22 slide is a side mount design, so it fastens directly to the cabinet interior sides along the length of the opening. The specified side clearance is 1/2 inch plus 1/32 inch minus 0 inch on each side, which sets the needed gap between the drawer or work surface member and the cabinet walls. That clearance range helps the ball bearings run freely without binding while keeping side play tight enough for stable support. The slide height is 1-13/16 inches, so the cabinet opening and work surface construction can be planned to give adequate vertical space around the hardware for smooth travel.
Using KV 8414 Hold Out Slides In Workstations
Where These KV 8414 Work Surface Slides Fit Best
The KV Model 8414 slide is designed to lock and maintain work surfaces in an extended open position, so it suits pull-out surfaces that must stay deployed while tools, fixtures, or equipment are used. With a 22 inch length, the slide works well where the usable surface needs full extension equal to that travel, such as auxiliary countertops or keyboard and equipment pull-outs built to that depth. The side mount configuration matches standard cabinet construction, allowing the slides to run along casework sides while the work surface or platform connects to the moving member. Because the slide is unhanded, it fits left or right locations in the same opening, which is useful when building multiple identical bays in a workstation line.
Why These Mounting Details Help Repeatable Installations
The hold out feature for work surfaces allows the extended platform to remain in position without retracting, which keeps the working area stable during tasks that require both hands on tools or material. Full extension travel brings the mounted surface completely forward, improving reach to the full depth of the platform and limiting interference from face frames or doors. The 1/2 inch plus 1/32 inch minus 0 inch side clearance on each side gives a defined tolerance window, which supports consistent fits when casework is produced in quantity using the same nominal opening width. The 32mm pattern ties the slide to system boring layouts, allowing dowel or screw lines to align with other hardware patterns in European-style cabinetry. Slide height of 1-13/16 inches signals how far the hardware will project vertically, informing rail placement and under-surface construction so the platform clears the slide during travel.
Common Questions About 8414B 22 Drawer Slides
What type of mounting does the 8414B 22 slide use?
The 8414B 22 slide is a side mount design, so it attaches along the cabinet sides and supports work surfaces or drawers that run parallel to those sides.
How far do these Knape and Vogt 22 inch drawer slides extend?
The Knape and Vogt 22 inch drawer slides are full extension, allowing the connected work surface or drawer to travel a distance equal to the 22 inch slide length.
What side clearance is required for the KV 8414 work surface slides?
The KV 8414 slides require 1/2 inch plus 1/32 inch minus 0 inch side clearance on each side, setting the opening size needed for smooth ball bearing movement.
What is the height of the 8414B 22 full extension drawer slides?
The 8414B 22 slides have a height of 1-13/16 inches, which helps determine rail placement and the vertical space available in the cabinet opening.
How does the hold out feature work on KV 8414 slides?
The KV 8414 slides are designed to lock and maintain work surfaces in the extended open position, keeping the surface deployed while tasks are performed.
What fasteners are recommended for these zinc finish ball bearing slides?
The 8414B 22 slides use recommended fasteners of #7 x 5/8 inch Phillips pan head, providing a screw size and head style suited to the slide holes.
Selecting These Slides For Work Surface Projects
The 8414B 22 full extension drawer slides bring together a 22 inch length, ball bearing action, and a hold out feature designed for work surfaces that stay open during use. Side mount construction, unhanded design, and a 32mm pattern support straightforward cabinet integration. The defined side clearance and 1-13/16 inch height supply clear dimensional targets when planning openings and platforms. For workstations or pull-out surfaces built around 22 inch travel, these Knape and Vogt 22 inch drawer slides offer a slide configuration matched to that layout.
