KV8414 10" Full Extension Hold-Out Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8414B 10

Knape And Vogt 10 Inch Drawer Slides For Work Surfaces

Knape and Vogt 10 inch drawer slides in the 8414 Series are full extension, side mount ball bearing slides designed for work surfaces that need to lock out in use. The hold-out feature locks and maintains work surfaces in the extended open position, so a pull-out shelf or platform stays put while it is being used. The 10 inch length supports shorter pull-outs where space is limited but stable extension is still required. An unhanded design allows the same slide to be used on either side, which simplifies layout and stocking for repeat jobs. These slides use a zinc finish, which provides a clean, uniform appearance that pairs with typical cabinet hardware. As side mount slides, they align along the cabinet sides and give installers a familiar mounting style for ball bearing hardware.

Key 8414B 10 Slide Details For Real-World Jobs

• The full extension action lets the 10 inch slide travel its full length, bringing the work surface or pull-out fully forward so the entire depth is accessible during use.
• The hold-out feature is designed to lock and maintain work surfaces in the extended open position, keeping a pull-out surface stable while weight or tools are placed on it.
• A side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side defines the required gap between drawer or shelf and cabinet, guiding cabinet and pull-out sizing.
• The slide height of 1-13/16 inch helps in planning vertical spacing between pull-outs, clearances under tops, and alignment with adjacent hardware in a cabinet run.
• The 32mm pattern on the slide aligns with system holes in 32mm case construction, helping slides index easily off line-bored cabinet sides during installation.
• Recommended fasteners are #7 x 5/8 inch Phillips pan head screws, giving installers a specific screw size and head style to match the slide holes and material thickness.

Side Mount Installation And Clearance Planning

These KV Model 8414 full extension slides are configured for side mount installation, so they fasten directly to the cabinet sides and the sides of the work surface or pull-out. The specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side sets the total width difference between the cabinet opening and the pull-out, helping avoid binding while controlling side play. A height of 1-13/16 inch keeps the slide low enough for many face frame or frameless layouts, while still offering space for the ball bearing mechanism. The presence of a 32mm pattern lets installers position the slides using standard 32mm system hole spacing, which ties easily into line-bored casework. Using #7 x 5/8 inch Phillips pan head screws matches the manufacturer recommendation for securing the slides.

Using KV 8414 Hold Out Slides In Cabinet Projects

Where These 10 Inch Side Mount Slides Fit Best

KV 8414 hold out slides at 10 inches are suited to work surfaces and pull-outs that need to extend fully yet remain secure in the open position. The hold-out design allows the surface to lock when fully extended, which supports use as a small work platform or pull-out shelf. With a side clearance of 1/2 inch plus 1/32 inch minus 0 inch per side, these slides fit cabinets built to that gap, helping installers match drawer or shelf width to opening width. The 1-13/16 inch slide height works in many base cabinet and workstation layouts, leaving room above and below for other hardware or components. Because the slides are unhanded, the same part installs on left or right, simplifying replacements and reducing the chance of mixing parts during a run.

Details That Support Consistent Slide Alignment

The full extension design of these Knape and Vogt 10 inch drawer slides allows the work surface to travel its complete usable length, which helps align the front edge flush with surrounding faces when extended. The 32mm pattern provides a predictable hole layout that matches 32mm cabinet construction, so installers can reference existing line boring instead of laying out every screw position individually. The specified side clearance tolerance of plus 1/32 inch minus 0 inch on each side gives a tight but defined range, reducing guesswork when sizing shelves or pull-outs and supporting smoother operation. A zinc finish provides a uniform surface on the slide members, which helps them move against each other consistently during repeated use. Recommended #7 x 5/8 inch Phillips pan head screws match the slide hole sizing and common cabinet material thicknesses, supporting secure fastening without over-penetration.

Common Questions About KV 8414B 10 Hold Out Slides

Select KV 8414B 10 Slides For Locking Work Surfaces

The KV Model 8414B 10 full extension hold-out slide provides 10 inch travel, a defined 1/2 inch plus 1/32 inch minus 0 inch side clearance, and a 1-13/16 inch height in a side mount format. The hold-out feature is designed to lock and maintain work surfaces in the extended open position, supporting pull-out platforms that must stay open. With a 32mm pattern and recommended #7 x 5/8 inch Phillips pan head screws, these Knape and Vogt 10 inch drawer slides integrate cleanly into 32mm casework. For projects requiring controlled extension and a locked open position, this 8414 Series slide is built for that role.