Amerock Everyday Heritage Knob For Cabinets

Amerock Everyday Heritage knob is a white ceramic 1-1/4 inch diameter knob designed for decorative hardware applications, so it gives doors and drawers a clean, simple pull point that suits many cabinet styles. The knob belongs to the Everyday Heritage collection, which provides a varied selection of styles in on-trend finishes, so this piece matches other components from the same Amerock family on a project. Its white finish presents a neutral, bright look that works across both painted and laminated cabinet fronts, avoiding visual clashes in mixed environments. The ceramic material creates a smooth, comfortable grip surface, which helps with frequent use on active doors. Amerock describes Everyday Heritage as marrying beauty and function, so this knob is intended to support repeated operation while contributing to the overall decorative plan in residential or commercial spaces.

Key Everyday Heritage Knob Details For Projects

• The knob uses a 1-1/4 inch (32 mm) diameter, so it offers enough fingertip contact for common cabinet and drawer sizes while staying compact on narrow rails and stiles.
• A projection of 15/16 inch (24 mm) sets the hand clearance off the front, which helps users grab the knob without knuckles crowding the door or face frame.
• The 1-1/4 inch (32 mm) width matches the stated diameter, so the profile remains balanced and visually proportional when lined up across a run of doors.
• A base diameter of 5/8 inch (16 mm) concentrates the connection area at the mounting point, which supports a stable feel against the cabinet surface under pull force.
• The knob is part of Amerock Corporation decorative hardware and moldings, so it fits into typical knob layouts used by cabinet shops and woodworking professionals.

Mounting And Fit Details For Amerock 232WHT Knob

The Amerock Everyday Heritage knob uses an 8-32 x 1 inch screw size, which matches a common cabinet knob thread pattern and length for standard door and drawer fronts. This thread spec lets installers work with familiar drilling and tapping practices. The 1-1/4 inch diameter head centers over the screw bore, so the knob covers the drilled hole while sitting flat against the face. With a base diameter of 5/8 inch, the contact point around the fastener stays tight to the surface, which supports alignment when tightening from the back side. The 15/16 inch projection keeps the knob from standing too far off the cabinet, which helps when doors open near walls or adjacent cabinets in tighter layouts.

Using The White Ceramic Everyday Heritage Knob On Jobs

Where This White Ceramic Cabinet Knob Works

This Amerock Everyday Heritage knob is identified as ideal for residential or commercial applications, so it suits kitchens, baths, built-ins, or light-duty commercial cabinetry where a simple round pull is appropriate. The white ceramic material and finish tie into the Everyday Heritage collection description of on-trend finishes, giving designers and builders a consistent color option across multiple cabinet lines. Its 1-1/4 inch diameter provides a familiar size that blends into standard cabinet door and drawer front proportions, which helps when matching existing hardware footprints on refacing projects. Because the base diameter is 5/8 inch, the knob sits on a modest footprint, fitting narrow rails or smaller drawer fronts without crowding edges or panel details. The ceramic construction also supports a smooth feel on frequently touched cabinet fronts in busy residential or commercial environments.

Why These Everyday Heritage Details Support Consistent Results

The Everyday Heritage collection is described as marrying beauty and function, so each dimension on this knob contributes to predictable handling on repeated installations. The 1-1/4 inch (32 mm) diameter and matching width standardize the grip area, which helps installers anticipate clearances when laying out multiple knobs along a run of doors. A 15/16 inch (24 mm) projection keeps pull points close to the door plane, which can reduce interference with nearby fixtures or opposing cabinets while still leaving room for fingers behind the knob. The 5/8 inch (16 mm) base diameter localizes pressure at the mounting point, which supports a firm seating of the knob when tightening the 8-32 x 1 inch screw from the back side. The white ceramic finish provides a consistent, smooth exterior that visually ties together cabinetry designed around neutral tones, supporting coordinated hardware selections across an entire project. Being part of Amerock decorative hardware and moldings, the 232WHT knob aligns with other Amerock pieces by style family and finish, which helps shops and installers create a cohesive hardware scheme on both new installations and upgrades.

Common Amerock Everyday Heritage Knob Questions

Selecting The Amerock Everyday Heritage Knob For Cabinets

The Amerock Everyday Heritage white 1-1/4 inch diameter knob, part number 232WHT, combines a ceramic construction with the Everyday Heritage collection design language, so it supports both decorative planning and everyday operation. Its stated projection, base diameter, and 8-32 x 1 inch screw size work together to provide a predictable fit on common cabinet doors and drawers in residential or commercial projects. For projects using neutral or white color schemes, this knob offers a consistent white ceramic finish that aligns with other Everyday Heritage hardware choices when building out a full room of cabinetry.