Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Everyday Heritage pull brings a 4 inch (102 mm) center-to-center layout that fits standard hole spacing on many cabinet and drawer fronts, which helps installers line up replacements or new fronts without layout guesswork. The 4-5/16 inch (110 mm) overall length gives a little overhang past the mounting holes, so the pull visually balances wider rails while still staying compact on smaller doors. A 1-1/4 inch (32 mm) projection sets the hand clearance off the face, giving fingers room to grab without the pull sticking too far into walkways. The 5/16 inch (8 mm) width and 5/16 inch (8 mm) base diameter create a slim profile that sits cleanly on narrow rails or stile edges. Its brushed chrome finish pairs with typical brushed chrome hinges or faucets, so hardware across the project can stay consistent. Zinc die-cast construction provides a solid-feeling grip for everyday cabinet use.
The Amerock Everyday Heritage 943SCH uses a 4 inch (102 mm) center-to-center hole spacing, so installers can drill or reuse two straight-line holes at that separation for each pull. Its 4-5/16 inch (110 mm) overall length means the ends extend slightly beyond the holes, which helps cover minor chipping around the bore area. The 1-1/4 inch (32 mm) projection defines how far the grip stands out from the cabinet, guiding door and drawer layout where fronts pass by adjacent surfaces. A 5/16 inch (8 mm) width and 5/16 inch (8 mm) base diameter concentrate the load on a small bearing area, which suits face frames, slab fronts, or narrow rails where wider feet could crowd edges.
The Everyday Heritage pull with 4 inch (102 mm) center-to-center drilling suits cabinets and drawers that follow this common spread, which is frequently used in both residential and commercial casework. Its 4-5/16 inch (110 mm) overall length lets the pull work on mid-size doors and drawers without overwhelming the front, so it adapts across kitchens, baths, and storage runs. The brushed chrome finish makes this pull a natural match for brushed chrome decorative hardware, which helps establish a continuous appearance from one bank of cabinets to the next. As part of the Everyday Heritage collection, the pull belongs to a defined Amerock decorative family, which supports coordinated selections when a project uses multiple styles from the same line.
The 1-1/4 inch (32 mm) projection of this pull sets a consistent stand-off dimension, which is useful when adjacent cabinets open close to walls or appliances. Its 5/16 inch (8 mm) width allows placement on narrower drawer fronts or face-frame rails, letting installers keep centerlines where the design demands. Zinc die-cast material gives the pull a solid, unified body, which handles routine opening forces on frequently used doors and drawers. The Amerock Everyday Heritage name and Amerock Corporation brand connect this pull to a recognized decorative hardware manufacturer, which supports product continuity when similar pulls are specified across multiple phases or areas.
The Amerock Everyday Heritage pull has a 4 inch (102 mm) center-to-center dimension, which matches a common drilling pattern for cabinet doors and drawers.
The 943SCH pull measures 4-5/16 inch (110 mm) in overall length, so it slightly overhangs the mounting holes and covers minor hole edges.
The Amerock Everyday Heritage pull is made from zinc die-cast material, providing a solid, rigid body for everyday cabinet and drawer use.
The brushed chrome pull projects 1-1/4 inch (32 mm) from the cabinet face, giving finger clearance while limiting how far it extends into walk paths.
The Amerock Everyday Heritage 4 inch pull has a 5/16 inch (8 mm) width and 5/16 inch (8 mm) base diameter, suiting narrower rails or slim drawer fronts.
The Amerock 943SCH cabinet pull has a brushed chrome finish, aligning with other brushed chrome decorative hardware on a project.
The Amerock Everyday Heritage pull with 4 inch (102 mm) center-to-center drilling, 4-5/16 inch (110 mm) overall length, and 1-1/4 inch (32 mm) projection gives installers clear mounting and clearance dimensions to plan around. Its brushed chrome finish and slim 5/16 inch (8 mm) width work across cabinets and drawers where a compact, coordinated pull is needed. Specifying the Amerock 943SCH lets projects tie into the Everyday Heritage collection while using a zinc die-cast pull that suits daily cabinet and drawer operation.
Sold In: 1 Each
