Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Allison Value Series pull in the Everyday Heritage collection is a zinc die-cast cabinet and drawer pull designed for residential or commercial applications, so it works across kitchen runs, office casework, or multi-unit projects. Its 3 in (76 mm) center-to-center drilling lines up with a common industry pattern, helping straightforward replacement of existing pulls bored on that spacing. The burnished brass finish provides a warmer metal tone that coordinates with traditional or transitional cabinet styles, giving designers and installers a flexible choice for mixed-finish jobs. At 3-7/16 in (87 mm) overall length, the pull spans slightly past the bore pattern, so it visually covers the drilled area while staying compact on narrow drawer fronts or smaller doors. The Amerock Corporation branding and BP3441BB part number give clear product identification for repeat orders and project documentation.
The 3 in (76 mm) center-to-center measurement defines the drilling pattern, so installers can lay out bores with a standard template or jig set to that spacing for fast, repeatable work. The 3-7/16 in (87 mm) length gives modest overhang beyond the holes, which can help visually balance the pull on both framed and frameless fronts. A 15/16 in (24 mm) projection sets the stand-off from the door or drawer face, meaning fingers can wrap behind the pull without contacting the surface, which reduces smudging at the grab point. At 7/16 in (11 mm) wide, the pull presents a slim edge to the user, fitting comfortably on narrow rails or small drawers where space for hardware is limited.
The Everyday Heritage pull with 3 in (76 mm) center-to-center spacing fits cabinet and drawer fronts bored on that common dimension, which covers many residential and commercial casework lines. Its burnished brass finish supports use in projects calling for warmer metal tones, such as traditional kitchens, home offices, or reception areas where brass-toned fixtures are already specified. The 3-7/16 in (87 mm) overall length works well on smaller drawer fronts, narrow stiles, or compact bath vanities where longer pulls could crowd edges or adjacent hardware. With a 15/16 in (24 mm) projection, the pull offers enough clearance for comfortable gripping on both doors and drawers, even when installed above countertop overhangs or near adjacent panels. The Amerock Allison Value Series designation positions this pull for multi-opening runs where consistent style and finish across many fronts are important for a unified look.
The defined 3 in (76 mm) center-to-center drilling simplifies template use, so installers can run repetitive boring operations without resetting jigs, which supports faster production on large banks of cabinets. The zinc die-cast construction gives a solid metal body that handles typical opening and closing cycles, so hardware swaps or new installations can be specified confidently for everyday traffic. The 7/16 in (11 mm) width keeps the pull slim, leaving more face area visible on decorative door profiles and reducing crowding when pulls are placed close to one another on smaller drawer stacks. The burnished brass finish provides a consistent surface appearance that supports matching across multiple pulls on long runs, helping designers and builders maintain visual continuity from one cabinet section to the next. Using the BP3441BB part number in planning documents and order lists keeps reordering straightforward when adding matching cabinetry later.
The Amerock Allison Value Series pull has a 3 in (76 mm) center-to-center measurement, which sets the drilling pattern for cabinet and drawer fronts that use this hardware.
The Everyday Heritage pull is 3-7/16 in (87 mm) long, so it extends slightly beyond the 3 in bore spacing and suits smaller doors and drawer fronts.
The BP3441BB pull has a 15/16 in (24 mm) projection, providing stand-off from the cabinet face for finger clearance during everyday use.
The Amerock Everyday Heritage pull is zinc die-cast, giving it a solid metal construction appropriate for typical cabinet and drawer applications.
The BP3441BB pull has a burnished brass finish, which offers a warm brass tone that coordinates with brass-toned hinges and fixtures.
The handle is 7/16 in (11 mm) wide, giving a slim grip profile that works well on narrow rails and smaller cabinet fronts.
The Amerock Allison Value Series 3 in (76 mm) center-to-center Everyday Heritage pull in burnished brass offers a defined drilling pattern, compact 3-7/16 in (87 mm) length, and zinc die-cast construction, making it a practical choice for coordinated residential or commercial cabinet projects. The 15/16 in (24 mm) projection and 7/16 in (11 mm) width balance clearance and a slim profile, so it suits both doors and drawers across a run. Use the BP3441BB part number to match this burnished brass pull wherever the same look and dimensions are required on current or future installations.
Sold In: 1 Each
