Amerock Everyday Heritage knob gives a 1-1/2 in diameter pull point in antique brass, so cabinets and drawers get a defined grip and a consistent visual target. The zinc die-cast material creates a solid-feeling knob that supports repetitive opening in residential or commercial spaces. The antique brass finish provides a warm, traditional look that coordinates with other brass-toned decorative hardware on face frames and doors. A 3/4 in projection establishes comfortable finger clearance away from the cabinet face, helping hands find the knob without scraping knuckles. Matching width and diameter at 1-1/2 in keep the knob centered over typical rail and stile layouts. A 5/16 in base diameter focuses the load onto a small footprint for a crisp outline against the door or drawer front.
This Amerock Everyday Heritage knob uses its 1-1/2 in diameter to sit comfortably within typical cabinet rail heights, which supports centered drilling without crowding edges. The 3/4 in projection establishes how far the knob stands off from the face, guiding drill-through alignment so the knob clears surrounding trim or adjacent doors. With a 5/16 in base diameter, the bearing area against the door or drawer front stays compact, which helps installers read their layout marks visually even after the knob is installed. The 1-1/2 in width paired with matching diameter keeps the knob symmetric, simplifying orientation during installation because any rotation maintains the same profile.
The Amerock Everyday Heritage Series antique brass 1-1/2 in knob works on cabinets and drawers where a single central pull point is preferred over wider pulls. The 1-1/2 in diameter suits both face-frame and frameless cabinet fronts, giving enough span for a firm grasp on standard door sizes. In residential settings, the antique brass finish coordinates with traditional and transitional interiors, so the same knob can carry from kitchens into baths or built-ins. In commercial applications, the zinc die-cast material supports repeated operation on storage cabinets, as the solid metal construction handles constant contact on busy doors. The Everyday Heritage collection positioning as ideal for residential or commercial applications means a single knob style can be specified across mixed-use projects.
The 1-1/2 in (38 mm) diameter gives installers a clear reference when laying out hole spacing across multiple fronts, helping rows of knobs track in a straight visual line. The 3/4 in (19 mm) projection sets a consistent reach depth from the cabinet face, so once a preferred setback is established on one door, the same feel carries across the entire run. The 5/16 in (8 mm) base diameter limits the footprint at the mounting point, which helps conceal the drilled hole while still leaving enough field of door surface around the knob to show grain or panel detail. With the knob width matching its diameter at 1-1/2 in, orientation becomes non-directional, so installation workflow is streamlined and there is no concern about left or right handing. The Amerock Corporation branding and defined Everyday Heritage collection give specifiers a clear reference point when repeating this knob on future phases or matching existing hardware.
The Amerock 890ABS knob has a 1-1/2 in (38 mm) diameter, 3/4 in (19 mm) projection, and 5/16 in (8 mm) base diameter, which guides drilling location and clearance planning on cabinet fronts.
The Amerock Everyday Heritage knob is zinc die-cast, giving a solid metal body that supports consistent feel and strength on cabinet and drawer installations in residential or commercial spaces.
The antique brass finish on this knob sets a warm brass tone, helping projects coordinate with similar decorative hardware and creating a unified look across doors and drawers.
The Everyday Heritage series knob is described as ideal for residential or commercial applications, so the same part can serve across kitchens, baths, and storage cabinets in mixed-use projects.
The 3/4 in projection means the knob stands three-quarters of an inch off the cabinet face, creating finger space that supports comfortable gripping and reduces hand contact with the door surface.
The 1-1/2 in diameter provides a fixed knob size that helps installers space centers evenly, keeping knob lines visually straight across banks of cabinet doors and drawers.
The Amerock Everyday Heritage Series antique brass 1-1/2 in diameter knob, model 890ABS, offers defined dimensions and finish for planned cabinet layouts. The zinc die-cast construction, 3/4 in projection, and 5/16 in base diameter give installers predictable mounting and a consistent user feel across residential or commercial cabinetry. For projects needing a warm antique brass tone and a single, repeatable knob size, this Everyday Heritage knob from Wurth Baer Supply aligns hardware selection with clear specifications.
Sold In: 1 Each
