Amerock Everyday Heritage Satin Nickel 1-1/4" (32 mm) Diameter Knob, BP1387G10

Amerock Everyday Heritage Knob For Cabinets

Amerock Everyday Heritage knob in satin nickel is a 1-1/4 in (32 mm) diameter cabinet knob that gives doors or drawers a defined handhold, which helps with consistent opening and closing on everyday use cabinets. The zinc die-cast material creates a solid-feeling knob body, which supports dependable gripping when hands are wet or gloved in a shop or residential setting. The Everyday Heritage collection focus on marrying beauty and function translates into a knob that contributes to a coordinated look while still doing its job on frequently used fronts. The satin nickel finish provides a subdued metallic surface that can help visually tie together hinges, pulls, and other satin nickel hardware on the same run of cabinetry. The 1-1/16 in (27 mm) projection sets the knob out from the face enough for fingers to wrap around, which reduces rubbing against the door surface when pulling.

Key Everyday Heritage Satin Nickel Details

• The 1-1/4 in (32 mm) diameter head presents a comfortable contact area, which spreads out pulling force and eases use on heavier cabinet doors or deeper drawers.
• The knob width of 1-1/4 in (32 mm) matches the listed diameter, which means the round face sits evenly on the door or drawer and supports consistent visual alignment across multiple fronts.
• A base diameter of 9/16 in (14 mm) concentrates the footprint at the mounting point, which helps seat the knob firmly against the surface and can reduce visible witness marks around the installation area.
• The 1-1/16 in (27 mm) projection spaces the knob away from the cabinet, which allows fingers to hook behind the edge and helps avoid knuckles striking the finished face when operating the door.
• The satin nickel finish gives a muted metallic appearance, which supports blending this knob with other satin nickel decorative hardware on the same project for a unified run of cabinetry.
• The zinc die-cast construction forms the knob from molded metal, which supports a consistent shape and weight that installers can repeat across banks of doors and drawers.

Cabinet Knob Mounting And Fit Details

This Everyday Heritage cabinet knob uses an 8-32 x 1 in screw size, which ties the knob into a standard cabinet knob thread commonly used in cabinet construction and millwork shops. That thread detail means the knob engages the screw securely, which supports a tight fit against the cabinet surface when the installer drives the screw from the interior side of the door or drawer front. The 1-1/4 in (32 mm) diameter face and 9/16 in (14 mm) base diameter work together to cover the drilled hole without overhanging narrow stiles, which helps maintain a clean edge reveal. With a projection of 1-1/16 in (27 mm), the knob stands off the surface at a predictable distance, which helps installers align it with adjacent hardware lines on overlay or inset cabinetry.

Using The BP1387G10 Knob In Real Projects

Where This Amerock Everyday Heritage Knob Fits

The Amerock Everyday Heritage Series satin nickel 1-1/4 in (32 mm) diameter knob BP1387G10 is suited to residential or commercial applications, which allows it to move from kitchen runs to office casework using the same visual language. The knob belongs to the Everyday Heritage collection, which lets designers or builders coordinate it with other pieces from the same series for a consistent decorative hardware theme across a project. As part of the Decorative Hardware & Moldings category, this knob serves on cabinet doors and drawers where a round pull point is needed, which keeps operation straightforward for users in busy spaces. The satin nickel finish supports use wherever a neutral metallic tone is desired, tying in with satin nickel hinges or pulls. The Amerock Corporation branding identifies it as part of a recognizable hardware line, which helps shops and installers repeat the same specification on additional jobs.

Why These Amerock Dimensions Support Workflow

The 1-1/4 in (32 mm) knob diameter provides a repeatable measurement that layout teams can use when planning drill locations, which simplifies setting jigs for door and drawer fronts across multiple cabinets. The 1-1/16 in (27 mm) projection gives drafters and builders a clear stand-off dimension, which is useful when checking knob clearance relative to adjacent doors, walls, or appliance panels during design. With a 9/16 in (14 mm) base diameter, the contact area at the cabinet face is tightly defined, which helps carpenters gauge how close they can place the knob to panel edges without crowding rails or stile profiles. The specified 8-32 x 1 in screw size ties directly into standard shop hardware, which streamlines drilling through fronts to a thickness that works with that screw length in common cabinet constructions. Because the knob is zinc die-cast, production teams can expect consistent part-to-part sizing, which supports efficient bulk installation using templates and power drivers.

Amerock Everyday Heritage Knob Buyer Questions

Choose This Knob For Coordinated Cabinet Runs

The Amerock Everyday Heritage Series satin nickel 1-1/4 in (32 mm) diameter knob BP1387G10 combines a defined 1-1/16 in (27 mm) projection, 9/16 in (14 mm) base, and zinc die-cast construction, which supports consistent drilling, mounting, and alignment across full cabinet runs. The satin nickel finish and Everyday Heritage collection identity allow this knob to visually coordinate with other satin nickel decorative hardware, which helps installers and shops present a unified look on residential or commercial cabinetry. For projects built around Amerock decorative hardware, selecting this knob keeps dimensions and finish predictable from one job to the next.