Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Allison 3 in cabinet pull is a zinc die-cast handle designed for everyday cabinet and drawer use, so it gives a consistent grip point for opening and closing doors or fronts. The 3 in (76 mm) center-to-center drilling matches common cabinet boring layouts, which helps when aligning multiple pulls in a run of doors or drawer banks. Its oil-rubbed bronze finish provides a dark, traditional look that coordinates with other bronze-finished decorative hardware on the same job. At 5-1/8 in (130 mm) overall length, the pull spans more of the drawer or door face, which helps visually balance standard-width cabinet fronts. A 1 in (25 mm) projection sets the gripping surface off the face of the cabinet, leaving finger room between hand and surface during operation. The 9/16 in (14 mm) width keeps the profile slim, which is useful when working on smaller doors or tight reveals.
This Amerock Everyday Heritage pull uses a fixed 3 in (76 mm) center-to-center hole spacing, so it aligns with standard drill patterns for many cabinet doors and drawers. That center-to-center dimension defines where the 8-32 threaded fasteners engage the pull, which helps position it square to the door or drawer face. The 1 in (25 mm) projection holds the gripping surface away from the cabinet, which reduces knuckle contact against raised panels or applied moldings during operation. With an overall length of 5-1/8 in (130 mm), the pull spans beyond the hole centers, giving some visual coverage around the drilling area on the front. The 9/16 in (14 mm) width concentrates the load along a narrow bar, which can be helpful when aligning multiple pulls in a straight visual line across upper or lower cabinets.
The Everyday Heritage collection is described as offering a varied selection of styles in on-trend finishes, which positions this BP174ORB pull for both residential and commercial applications where coordinated hardware is important. Its 3 in (76 mm) center-to-center measurement matches many existing cabinet drillings, which suits replacement work on kitchens, baths, and built-ins using that standard spacing. The oil-rubbed bronze finish ties into traditional and transitional cabinet designs, so it works on wood species and stains that pair with darker hardware. Zinc die-cast construction keeps the pull consistent piece-to-piece, which is useful when installing multiple units across larger casework installations. Because the projection is 1 in (25 mm), the pull works on doors and drawers where moderate hand clearance is needed without a deep stand-off from the surface.
The 3 in (76 mm) center-to-center dimension on this Amerock Allison Value Series pull helps installers repeat drilling layouts accurately, since the spacing is a commonly used standard. The 5-1/8 in (130 mm) overall length gives some margin around the screw locations, which can help visually mask slight drilling variations while keeping the pull aligned with surrounding fronts. Its 9/16 in (14 mm) width lets multiple pulls sit near each other on narrow rails or small drawer faces, which can reduce interference in tight cabinetry runs. The 1 in (25 mm) projection ensures fingers can wrap behind the bar, which supports a secure grip when opening heavier drawers. The oil-rubbed bronze finish coordinates with other Amerock decorative hardware options described as on-trend finishes, helping maintain a unified look across hinges, knobs, and other pulls in the Everyday Heritage family.
The Amerock BP174ORB pull has a 3 in (76 mm) center-to-center size, so it matches many standard cabinet drilling patterns for straightforward alignment on doors and drawers.
The pull length is 5-1/8 in (130 mm), giving coverage beyond the screw holes, which helps the hardware visually balance on typical cabinet and drawer fronts.
The BP174ORB cabinet pull is zinc die-cast, providing a solid, uniform body that maintains the same feel and dimensions across multiple pieces in a project.
This Amerock cabinet handle uses an oil-rubbed bronze finish, giving a dark, traditional appearance that coordinates with other bronze decorative hardware.
The Everyday Heritage pull projects 1 in (25 mm) from the cabinet face, creating space for fingers to grip comfortably without pressing against the door or drawer.
The Amerock Allison Value Series pull has a 9/16 in (14 mm) width, giving a slim profile that suits smaller doors or tight reveals between adjacent fronts.
The Amerock Allison 3 in cabinet pull, BP174ORB, combines a 3 in (76 mm) center-to-center layout with a 5-1/8 in (130 mm) overall length, which suits many cabinet and drawer fronts using that standard drilling. Its zinc die-cast construction and oil-rubbed bronze finish align with the Everyday Heritage collection, giving a coordinated look across multiple pieces. By matching the 3 in spacing, this pull fits projects focused on consistent hardware placement in residential or commercial cabinetry.
Sold In: 1 Each
