Amerock Hatfield Series polished chrome knob is a 1-3/16 inch (30 mm) diameter zinc die-cast knob designed for decorative cabinet and furniture use, so it serves as both a pull point and a visual detail on doors or drawers. The polished chrome finish reflects surrounding surfaces, which helps this knob blend into mixed hardware layouts while still reading clean and bright on the face of the cabinet. Its 1-1/16 inch (27 mm) projection stands the gripping surface off the door or drawer front, creating finger clearance for a positive pull. The 11/16 inch (17 mm) base diameter steps the knob down at the contact point, focusing load around the mounting hole area on the panel. As part of Amerock's Everyday Heritage collection, this knob is positioned for residential or commercial applications where consistent styling is used across multiple openings.
This Amerock corporation knob uses an 8-32 x 1 inch screw as its mounting interface, so it threads onto a standard machine screw that passes from the back of the cabinet front into the knob body. The 1-3/16 inch (30 mm) diameter and 1-1/16 inch (27 mm) projection define the working envelope around the pull point, which helps with planning spacing between adjacent knobs on doors or drawers. The 11/16 inch (17 mm) base diameter locates the load on a relatively compact footprint on the face of the door or drawer, which aligns with typical boring patterns used on cabinet fronts, furniture, and similar woodwork. As part of the Everyday Heritage collection, the knob is intended for use where decorative pulls are laid out in consistent rows or grids across multiple openings.
This Amerock Hatfield Series polished chrome 1-3/16 inch (30 mm) diameter knob is identified as ideal for residential or commercial applications, so it can be used across kitchens, baths, built-ins, and work areas that share the same decorative hardware family. The Everyday Heritage collection positioning means the knob is designed as part of a varied selection of styles in on-trend finishes, which supports projects that mix knobs and pulls while keeping finish and general styling aligned. Its polished chrome finish reflects light and nearby surfaces, which suits installations where a bright metal accent is part of the overall design scheme on cabinets or casework. The 1-3/16 inch diameter and 1-1/16 inch projection give it a compact footprint, which helps on smaller drawer fronts or narrow doors where larger pulls could crowd adjacent hardware.
The defined 1-3/16 inch (30 mm) diameter lets installers lay out center-to-center spacing on cabinet doors and drawers with predictable clearances between adjacent knobs, which reduces layout variation across a run of fronts. The 1-1/16 inch (27 mm) projection sets the knob out from the surface enough to give hand clearance while keeping the pull close to the face, which helps maintain a tight visual profile on frameless or face-frame cabinets. The 11/16 inch (17 mm) base diameter focuses contact around the mounting hole, which aids in seating the knob squarely when tightened. The 8-32 x 1 inch screw size aligns with a widely used cabinet hardware thread, which supports straightforward installation on typical door and drawer front thicknesses. As a zinc die-cast part with a polished chrome finish, the knob presents a solid-feeling grip and a consistent surface appearance, which supports repeatable results across multiple openings in the same project.
The Amerock BP5300226 knob has a 1-3/16 inch (30 mm) diameter, 1-1/16 inch (27 mm) projection, and an 11/16 inch (17 mm) base diameter, which defines its footprint and stand-off on cabinet fronts.
The Amerock Hatfield Series polished chrome knob is made from zinc die-cast material, which provides a solid metal body suitable for decorative cabinet and furniture pulls.
The knob uses a polished chrome finish, which delivers a bright, reflective surface that coordinates with other chrome decorative hardware in the same project.
The BP5300226 knob mounts using an 8-32 x 1 inch screw that threads into the knob from the back of the door or drawer front, creating a standard machine-screw connection.
This knob is described as ideal for residential or commercial applications, so it suits cabinets and furniture in homes, offices, or similar built environments using decorative hardware.
The Amerock BP5300226 knob is part of the Everyday Heritage collection, which offers a varied selection of styles in on-trend finishes for coordinated hardware layouts.
The Amerock Hatfield Series polished chrome 1-3/16 inch diameter knob brings a defined set of working dimensions, a zinc die-cast body, and an 8-32 x 1 inch mounting interface to cabinet and furniture work. Its polished chrome Everyday Heritage styling supports projects that call for consistent decorative hardware across residential or commercial spaces using this finish. For cabinet runs, built-ins, or furniture pieces calling for a compact, bright metal pull matched to standard boring and threading practices, this Amerock BP5300226 knob provides a clearly specified option ready to integrate into planned layouts.
Sold In: 1 Each
