KV8407 14" Full Extension Hold-in anti-rebound Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8407B 14

Knape And Vogt 14 Inch Drawer Slides For Shelves

Knape and Vogt 14 inch drawer slides in the 8407 Series are side mount, ball bearing slides designed for applications using shelf tabs. The full extension design brings the drawer or shelf fully out of the cabinet, which exposes the usable depth for easier access to stored items and hardware during work. The hold-in anti-rebound action works with the ball bearing system to keep the slide closed, which helps keep drawers from drifting open in normal shop or cabinet use. The slides are unhanded, so the same part works on either side, which simplifies stocking and layout on the bench. A 1/2 inch plus or minus 1/32 inch side clearance per side provides a defined gap target, giving installers a clear opening size to aim for when building or modifying cabinets. The zinc finish provides a standard metal appearance that suits a wide range of cabinet interiors on the job.

Key 8407B 14 Features That Support Cabinet Work

• The drawer slide uses a ball bearing design, which creates a smoother travel path that helps drawers and pull-out shelves move consistently under load during repeated use.
• Full extension travel lets the 14 inch slide open the drawer its full length, which exposes hardware and stored parts at the back for easier selection, labeling, and cleaning.
• The slide height of 1-13/16 inches sets a known profile, which helps with planning vertical clearances when stacking drawers or fitting slides between fixed components.
• Side clearance of 1/2 inch plus 1/32 inch minus 0 each side defines the cabinet-to-drawer gap, which supports accurate box sizing and reduces fitting time during installation.
• The 32mm pattern is present, which aligns the slide with common system hole layouts and supports repeatable boring setups on cabinet production jobs.
• Lever disconnect is built into the slide, which allows installers to separate the drawer member from the cabinet member for faster mounting, adjustment, and removal.
• Shelf tabs are integrated on this 8407 model, which support shelf-style pull-outs where the slide must register against a shelf edge during assembly.

Mounting And Clearance Details For 8407B Slides

These Knape and Vogt 8407B 14 slides are side mount units, so they register directly to the cabinet side, which suits frameless layouts and defined side panels. The specified side clearance of 1/2 inch plus 1/32 inch minus 0 each side provides an exact opening-to-drawer relationship, helping builders cut drawer widths that track reliably without racking. The height of 1-13/16 inches sets the envelope of the slide, so installers can plan rail positions and shelf spacing around that dimension. The 32mm pattern aligns the slide holes with standard system rows, which can reduce layout time when using line boring equipment or pre-drilled cabinet sides.

Using 8407 Series Slides In Cabinet Installations

Where 8407B 14 Drawer Slides Are Typically Applied

KV Model 8407 with shelf tabs is suited to shelf-style pull-outs where the tabs locate against the shelf or tray, which is useful for roll-out shelves in base cabinets or storage units. The unhanded design lets the same 8407B 14 slide serve on either left or right, simplifying inventory and avoiding side-specific parts on site. The full extension action on this 14 inch slide allows pull-outs and drawers to clear face frames or edges, helping installers gain working access to stored items toward the back. The hold-in anti-rebound function works with the ball bearing slide to retain the closed position, which is helpful in cabinets that experience regular opening and closing during daily shop or residential use. The zinc finish gives a neutral metallic look, which fits general cabinet interiors where a functional appearance is acceptable. Availability in Anochrome and Ebony Black as special order finishes provides additional appearance options when a different visual match is needed.

Details That Support Repeatable Fits And Changeouts

The manufacturer part number 8407B 14 identifies this as a 14 inch member of the 8407 Series, which helps match replacement slides when servicing existing installations that already use this model. The side clearance of 1/2 inch plus 1/32 inch minus 0 on each side creates a repeatable standard, enabling cabinetmakers to run consistent drawer widths across multiple boxes. The 1-13/16 inch slide height offers a predictable profile, which simplifies rework when retrofitting these slides into older cabinets that used similar side mount patterns. The 32mm pattern presence means the mounting holes relate to common system spacing, which supports accurate repositioning if drawers are adjusted or replaced later. Lever disconnect enables quick separation of the drawer member, which makes it easier to remove a loaded pull-out or swap slides during troubleshooting without dismantling the entire cabinet structure.

Common Questions About Knape And Vogt 8407B 14 Slides

Choose 8407B 14 Slides For Defined Fit And Access

The Knape and Vogt 8407B 14 full extension drawer slide combines side mount installation, a 1/2 inch plus 1/32 inch minus 0 side clearance, and lever disconnect to support precise cabinet builds and straightforward servicing. The 1-13/16 inch height and 32mm pattern provide predictable layout points that help keep drawer runs consistent across a project. Select this 14 inch 8407 Series model when a shelf-tab ball bearing slide with clear dimensional guidance will support your cabinet workflow.