KV 8407 10-Pair Box 24" Hold-In/Anti-Rebound Side Mount Full Extension 100 lb Ball Bearing Drawer Slide, Zinc, 8407B 24

Zinc-Finished Ball Bearing Drawer Slides Built for High-Volume Cabinet Work

The Knape and Vogt 8407 series is a 24 inch full-extension side-mount ball bearing drawer slide, rated 100 lb per pair, with a hold-in anti-rebound detent that keeps the drawer closed until pulled. The zinc finish is the segment's proven workhorse surface — corrosion-resistant, unobtrusive inside a cabinet box, and ready to match the hardware already on the job. This Bulk-Pack format is sized for shops running drawer installations at volume, not one-at-a-time retail quantities.

Key Features

• Full extension brings the entire drawer out to the cabinet face so the back of the box is fully reachable.
• Hold-in anti-rebound detent keeps the drawer closed after a firm push, stopping it from bouncing back open.
• 100 lb load rating per pair covers standard kitchen, office, and utility drawers with room to spare.
• Zinc finish provides dependable indoor corrosion resistance and a clean, neutral look inside the cabinet.
• Non-handed design means both slides in a pair are identical — no left/right sorting at the bench.
• Bulk-Pack format supplies the shop-floor quantities a production cabinet run demands.

Where This Slide Earns Its Keep

A 24 inch full-extension slide is the right choice wherever the drawer is deep enough that rear access matters. Pots-and-pans base drawers, file and utility pulls, and shop bench drawers all benefit from a slide that brings everything to the front. The hold-in anti-rebound detent addresses a specific frustration in those same applications: a drawer loaded with heavy contents and pushed firmly shut tends to rebound. The detent catches it. There is no spring assist, no damper — just a mechanical catch that holds the drawer closed until someone pulls it open intentionally.

Material and Finish

Cold-formed steel members with a zinc plated finish give this slide its corrosion resistance for dry, indoor environments. Zinc is the standard working finish for side-mount ball bearing slides because it protects the steel without adding visual weight. It is not a decorative finish and is not suited to wet or exterior settings — this slide belongs inside the cabinet, which is exactly where it will spend its life. Ball bearings run in full-length steel raceways for smooth, consistent travel across the slide's full 24 inch length.

The Right Fit for Production Cabinet Shops

The 8407 series targets shops and contractors who install drawers in quantity. The non-handed format eliminates a sorting step on the bench — pull two from the bin and both fit. The Bulk-Pack brings enough slides to work through a run without constantly reordering. Side clearance is 1/2 inch per side, so the drawer box is built 1 inch narrower than the cabinet opening. In face-frame cabinets, rear mounting brackets are required for back-end support; those brackets are sold separately and are series-matched to the 8407. For frameless construction on the 32mm system, the slide mounts directly to the panel face.

Zinc Reliability, Production-Ready Quantities

The 8407B 24 delivers full extension and hold-in performance at the 100 lb class in a zinc finish that works quietly inside any standard interior — exactly what a production cabinet run needs on the bench and in the box.