KV8407 16" Full Extension Hold-in anti-rebound Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8407B 16

Knape And Vogt 16 Inch Full Extension Slides

Knape and Vogt 16 inch drawer slides provide a full extension side-mount solution, so a 16 inch drawer or shelf can travel its full length for clear access to stored items. The 8407 Series uses ball bearing movement, giving the drawer a controlled, smooth travel path that supports precise cabinet work. The slides are unhanded, so the same member works on either side of the drawer, simplifying layout and stocking for repeat jobs. A hold-in anti-rebound feature works with the ball bearings to keep the drawer closed when pushed in, which matters on installations where vibration or repeated use might otherwise nudge drawers open. The 8407 model designation with shelf tabs shows these slides are configured for shelf-style applications as well as drawers. A zinc finish on the slide members provides a clean, neutral appearance that works with typical cabinet interiors.

Key 8407B 16 Drawer Slide Details For Pros

• KV Model #8407 with shelf tabs defines this slide as part of Knape and Vogt's 8407 Series, giving installers a consistent reference point when matching to existing shop standards.
• Full extension travel lets a 16 inch drawer or shelf open its complete length, helping users reach items at the back without shifting contents during regular cabinet use.
• Side mount, ball bearing construction supports smooth motion along the cabinet side panels, which helps finished drawers track accurately within the opening.
• Unhanded design means each slide can mount on either the left or right side, simplifying inventory because there is no need to separate dedicated left and right members.
• Hold-in anti-rebound action helps keep the drawer closed once seated, which is useful in work areas where movement or vibration could otherwise walk drawers back open.
• Available finishes listed as Anochrome and Ebony Black (special order) allow matching the slide finish to project appearance standards, especially on higher-visibility cabinetry.

Mounting And Fastener Details For 8407B 16

The Knape and Vogt 8407B 16 slide is a side mount design, so it registers against the cabinet interior side walls for straightforward layout. Side clearance per side is 1/2 inch plus 1/32 inch minus 0, which defines the drawer box width needed for proper running clearance in the opening. The slide height of 1-13/16 inch affects how much drawer side height is available above the hardware, guiding the drawer design. A 32mm pattern is specified, aligning the slide with 32mm system drilling for efficient line-boring operations. The manufacturer recommends #7 x 5/8 inch Phillips pan head fasteners, tying fastener selection directly to the slide's hole pattern and thickness.

Using 8407B 16 Slides In Cabinet Projects

Where These 16 Inch Slides Are Applied

The 8407B 16 designation identifies a 16 inch length in the 8407 Series, matching cabinets or shelves that need that nominal travel. Side mount configuration suits face-frame or frameless cabinetry that already uses side-mounted hardware patterns, letting shops stay with familiar construction methods. Because the slides are unhanded, they can be pulled from stock and placed on either cabinet side, which speeds repetitive production work. The 32mm pattern note connects directly to system cabinetry, where rows of 32mm-spaced holes carry multiple hardware types; this allows the same line-bored case sides to accept these slides without extra layout time. The shelf tabs in the KV Model #8407 description show that these slides are configured to support shelf-style or tray-style elements, not just traditional box drawers.

Details That Support Consistent Drawer Results

The side clearance of 1/2 inch plus 1/32 inch minus 0 on each side gives a clear dimension target when sizing drawer or shelf components, helping fabricators avoid binds or excessive play. Full extension travel in a 16 inch slide means the moving member can bring the load nearly completely forward, which matters in deeper base cabinets where rear access is otherwise restricted. Ball bearing construction allows the slide members to move with minimal friction, contributing to a smoother feel that reflects well on the overall cabinet build quality. The hold-in anti-rebound detail keeps the drawer seated when pushed closed, so finished installations look tidy instead of showing partially open fronts. Recommended #7 x 5/8 inch Phillips pan head fasteners provide a matched shank and head style for the slide's mounting holes, which helps the slide sit flat against the cabinet side during installation.

Common Questions About 8407B 16 Drawer Slides

Selecting 8407B 16 Slides For Your Next Build

The Knape and Vogt 8407B 16 pairs a 16 inch full extension length with side mount, ball bearing construction, giving cabinet builders a defined, repeatable slide specification. The 1-13/16 inch height, 1/2 inch plus 1/32 inch minus 0 side clearance, and 32mm pattern all work together to guide drawer sizing and drilling. With a hold-in anti-rebound feature and unhanded layout, this slide supports efficient production while delivering controlled drawer travel. Put these details to work where a 16 inch Knape and Vogt 8407 Series slide matches your cabinet design.