KV8407 10" Full Extension Hold-in anti-rebound Ball Bearing Drawer Slides, Unhanded Side Mount Zinc Bulk-Pack - 8407B 10

Knape And Vogt 10 Inch Full Extension Drawer Slides

Knape and Vogt 10 inch full extension drawer slides give a short-depth drawer the same full travel as longer runs, so the back of the drawer clears the cabinet face for better access and hardware service. The slides are part of the Knape and Vogt 8407 Series, so they match that family when you are standardizing a shop program. A side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side defines the drawer box width relative to the opening, which keeps layout straightforward across multiple cabinets. A height of 1-13/16 inch sets the minimum drawer side height at the slide location, helping with proportioning shallow utility drawers. The slides are unhanded side mount units, so the same member works left or right on cabinet projects. A ball bearing design supports a smooth running feel along the full extension travel distance.

Key Slide Details That Support Cabinet Work

• The Knape and Vogt 8407 Series designation ties this 10 inch slide into a larger product family, which simplifies replacements and scheduling when repeating layouts across several jobs.
• A full extension function moves the drawer its full 10 inch length, which exposes the entire drawer interior and helps during fitting, labeling, and organizing small hardware or tools.
• The side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side defines a clear target drawer width, reducing layout errors on production runs and rework during installation.
• The slide height of 1-13/16 inch helps verify drawer side heights, making it easier to align the slide centerline with existing construction lines and avoid interference with the drawer bottom groove.
• The 32mm pattern on the slide aligns with that system layout, so case drilling can follow consistent hole spacing and speed up line boring and jig-based cabinet construction.
• Lever disconnect built into the slide allows the drawer member to separate from the cabinet member, which simplifies finishing work, transport, and on-site adjustments around other installed components.
• Shelf tabs on the KV Model 8407 provide a locating feature against a shelf or panel edge, which can speed setup when repeating shelf-mounted or tray-style installations in a run of cabinets.

Installation, Side Clearance, And Mounting Pattern

This Knape and Vogt 8407B 10 slide is a side mount ball bearing slide, so it fastens to the cabinet side rather than the bottom, supporting common face-frame and frameless layouts. The specified side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side gives a precise design window for drawer width relative to the opening, which helps when using CNC or templates for box production. A slide height of 1-13/16 inch sets a predictable vertical zone on the drawer side, keeping it clear of the bottom panel and allowing for standard screw rows. The 32mm pattern noted for the slide means the mounting holes are positioned to follow that system line, so case sides drilled on 32mm centers will line up with the slide holes for faster screw placement.

Using 8407B 10 Slides In Cabinet And Shelf Projects

Where These 10 Inch 8407 Slides Are Typically Used

The KV Model 8407 with shelf tabs and 10 inch length suits shallow drawers, pull-out trays, or shelf-based storage where the cabinet depth is limited but full access is still required. The unhanded side mount configuration means the same 8407B 10 part handles both left and right sides, which streamlines inventory on shop carts and in service vehicles. A side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side benefits projects that repeat the same cabinet opening, because once the drawer width is dialed in, that dimension can be run consistently across multiple units. The 1-13/16 inch slide height supports use in compact drawer boxes where vertical space is tight, allowing the slide to sit low on the box side while preserving interior depth above. Lever disconnect helps in shops that prefinish parts or batch spray drawers separately from cases, since drawers can be mounted after finishing without fighting full-case handling.

Details That Support Repeatable Mounting And Alignment

The 32mm pattern on this 8407 Series slide supports a drilling strategy based on 32mm centers, so line-bored cases or CNC-drilled patterns will line up with the slide mounting zones and reduce layout time. The specified side clearance window of 1/2 inch plus 1/32 inch minus 0 inch on each side provides a known tolerance band for drawer box sizing, which supports consistent reveals from cabinet to cabinet. A 10 inch full extension ball bearing design gives the drawer predictable travel and feel, allowing installers to plan stop positions relative to nearby doors, walls, or equipment. Shelf tabs on the KV Model 8407 act as reference points during installation, helping position the slide relative to shelves or tray bottoms when building roll-out storage. The unhanded side mount configuration means orientation is straightforward on site, so installers can move from cabinet to cabinet without sorting left and right members, which supports tighter installation schedules and cleaner workflows.

Common 8407B 10 Slide Questions From Installers

Selecting This 10 Inch 8407 Slide For Your Project

The Knape and Vogt 8407B 10 combines 10 inch full extension travel, 1/2 inch plus 1/32 inch minus 0 inch side clearance, and a 1-13/16 inch height in a side mount format that fits many shallow drawers and trays. The 32mm pattern and lever disconnect support streamlined shop production and on-site installation, especially where cases follow system drilling. When a project calls for a 10 inch Knape and Vogt 8407 Series slide with shelf tabs and ball bearing action, this model aligns with those requirements and supports efficient cabinet construction.