Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
8000 pantry drawer slides from Knape and Vogt are pantry drawer slides designed for pantry pull-out applications where a 130lb capacity rating helps support heavier stored items. The bottom-mount layout positions the slide beneath the drawer, which keeps the sides clear for storage space and hardware-free access. An undermount design supports a clean side appearance because the slide hardware sits below the box instead of alongside it. The 18 inch length suits cabinets built for this specific slide size, which matters when matching travel to cabinet depth. Overtravel extension lets the pantry drawer move beyond full extension, improving access to items at the back of the drawer. A hold-in detent feature keeps the drawer retained in the closed position, which helps resist unintended opening during normal use. Removable mounting brackets are part of the slide system and allow the pantry unit to be taken out when needed for cabinet work or adjustments.
The bottom-mount configuration places the slide under the drawer, so installers work from the cabinet floor and drawer bottom instead of side panels. An undermount design uses concealed hardware beneath the drawer box, which keeps side clearances focused on structural fit rather than exposed slides. Side clearance for the slide alone is 3/4 inch, giving a defined spacing target when sizing the drawer relative to the cabinet opening. With brackets installed, side clearance is 2-1/4 inches, which matters when framing the pantry opening and adjacent storage. A height of 1.54 inches sets the vertical space the slide occupies, helping plan bottom clearances, toe kick transitions, or interior obstructions. Recommended fasteners are #8 x 5/8 inch Phillips pan head, so installers can match their screw selection to the manufacturer guidance for anchoring into the cabinet and drawer materials.
Knape and Vogt 8000 pantry drawer slides are pantry drawer slides built for pantry drawer applications that benefit from a 130lb capacity rating. The 18 inch length fits layouts designed around that specific slide travel, which helps align drawer depth with standard pantry carcass dimensions. Side clearance of 3/4 inch for the slide alone defines how much width the hardware occupies between the drawer and cabinet, aiding designers and installers when sizing drawer boxes. When using the system with brackets, the 2-1/4 inch side clearance value helps plan clearances between the moving pantry section and fixed cabinet parts. A slide height of 1.54 inches gives a firm number for vertical planning, useful where the pantry base, bottom stretchers, or nearby runners might limit space. The 32mm pattern on the slide ties into cabinetry drilled on a 32mm system, helping integration in shops set up around that standard.
The 130lb capacity rating gives installers a defined load capability, supporting pantry designs that organize heavier goods without exceeding the slide specification. Overtravel extension means the drawer travels beyond full extension, improving visibility and hand access to items stored toward the rear of the pantry. A hold-in detent keeps the drawer seated in the closed position until pulled past the detent, which supports consistent alignment of pantry fronts with adjacent doors and drawer faces. The bottom-mount undermount configuration keeps hardware below the drawer, which can simplify aligning drawer fronts because side clearances are not visually interrupted by slides. Removable and mounting brackets provide a built-in way to remove the pantry drawer unit, which can streamline adjustments, finishing work, or service inside the cabinet. The Anochrome finish identifies the appearance of the slide, which helps installers keep a uniform look across visible hardware points inside a project where that matters.
Knape and Vogt 8000 pantry drawer slides have a 130lb capacity rating, which supports pantry drawers carrying heavier stored items within that specified load.
Knape and Vogt 8000 pantry drawer slides in this model are 18 inches long, which suits cabinet designs that match drawer depth and slide travel to that length.
These 8000 pantry drawer slides use a bottom-mount undermount design, so the hardware mounts beneath the drawer rather than along the drawer sides.
The 8000 pantry drawer slides have overtravel extension, allowing the drawer to move beyond full extension for better access to items stored toward the rear.
Side clearance is 3/4 inch for the slide alone and 2-1/4 inches with brackets, which sets the width requirements for the pantry drawer and cabinet opening.
Recommended fasteners for these pantry drawer slides are #8 x 5/8 inch Phillips pan head, aligning screw size and head style with the slide mounting details.
Knape and Vogt 8000 pantry drawer slides from Wurth Baer Supply combine 18 inch length, 130lb capacity, overtravel extension, and a bottom-mount undermount layout for pantry drawer work. The defined side clearances, 1.54 inch slide height, 32mm pattern drilling, and recommended #8 x 5/8 inch Phillips pan head fasteners give installers concrete numbers to design and build around. Use this model when a pantry project calls for an Anochrome-finished undermount slide that supports heavier pull-outs and benefits from overtravel for back-row access.
Sold In: 1 Set
