Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt 8000 series delivers a 28 inch bottom-mount pantry drawer slide in an Anochrome zinc finish, rated 130 lb and built with 1 inch of over-travel so tall pantry bins and pull-out shelves clear the countertop overhang completely.
Standard full-extension slides bring a drawer to the cabinet face — enough for most kitchen drawers, but not always enough for a tall pantry pull-out sitting under a countertop overhang. The 8000's 1 inch of over-travel pushes the box past that overhang so the contents are fully reachable without awkward angles. That extra inch matters most on base pantry cabinets, utility towers, and roll-out shelves where the counter lip would otherwise block the top of the box. At 28 inches, the slide also suits deeper pantry boxes that need the full run of travel to keep rear contents accessible.
The slide is formed from steel and carries an Anochrome zinc finish — the same corrosion-resistant electroplated zinc used across the KV 8000 series. The finish holds up in dry indoor environments, including the pantry and utility cabinet work this slide is designed for. Ball bearings running in formed steel raceways keep travel smooth and precise under load, and the hold-in anti-rebound detent is mechanical, with no damper to wear out or replace.
Cabinet shops and contractors building or retrofitting pantry towers, pull-out shelving units, and base cabinets that live under a deep counter overhang will find the over-travel spec particularly useful here. The 130 lb per pair rating gives comfortable headroom for loaded canned goods trays, spice pull-outs, and utility drawers. Designers specifying kitchen storage systems where handle-less operation is not required — and where a mechanical hold-in close is preferred over soft-close — will find the 8000 a straightforward, reliable workhorse for this application. This is an indoor slide; it is not rated for damp, exterior, or wash-down environments.
The slide fastens along the bottom panel of the drawer side rather than the center or top. For tall pantry boxes this positions the support point low, which improves stability. Measure from the cabinet floor to confirm the mounting position aligns with your box construction before ordering.
Verify the sold-as unit on the product listing before ordering — pantry slides in this series are available as individual members and as pairs depending on the SKU. A complete drawer installation requires one slide on each side.
No. The hold-in detent keeps the drawer from drifting open and stops it from bouncing back after closing, but there is no damper. The drawer closes firmly rather than slowly. If a damped, silent close is the priority, look at a soft-close slide instead.
Slide length should match the interior depth of the cabinet and the nominal length of the drawer box. For bottom-mount side slides, the box is typically sized to leave clearance at the rear; confirm your cabinet's interior depth accommodates a 28 inch slide plus any rear hardware before ordering.
When the job calls for a heavy-capacity pantry pull-out that needs to clear a counter overhang, the 8000 series in 28 inch Anochrome delivers the over-travel, the load rating, and the mechanical reliability to keep that drawer working for years.
Sold In: 1 Set
