Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt 8000 series pantry drawer slide delivers 1 inch of over-travel extension on a 20 inch bottom-mount ball-bearing slide rated 130 lb per pair — purpose-built for pantry pull-outs, tall cabinet inserts, and any application where the drawer needs to clear a countertop overhang or deep face frame before its contents are fully accessible.
Standard full-extension slides bring the drawer out to the cabinet face, which is often enough for a standard drawer. Pantry pull-outs are different: they sit behind deep face frames or under countertop overhangs, and a drawer that stops at the face leaves the back half of a tall pantry insert out of reach. The 1 inch of over-travel on this slide pushes the box past the cabinet face so the entire pull-out is accessible from the front without reaching around the frame. That extra inch also matters when the pantry insert itself has a fixed bottom shelf or wire basket that needs to clear the cabinet opening completely before it can be loaded or unloaded.
Steel members with an Anochrome zinc finish give this slide the corrosion resistance it needs for long indoor service in kitchen and pantry environments. Ball bearings in full-length retainers keep travel smooth and consistent across the 130 lb rated load — a capacity that covers the real weight of a loaded pantry column without asking the hardware to work near its limit. The hold-in anti-rebound detent is built into the mechanism, not an add-on, so it works consistently without adjustment.
Cabinet shops building pantry pull-out inserts, tall utility pull-outs, and deep base-cabinet drawers will get the most from this slide. The bottom-mount position suits pantry-style carcase construction where the drawer bottom panel, not the side walls, carries the slide. At 20 inches, this length fits a standard 21-inch-deep pantry cabinet with room for the rear mounting hardware. Contractors and designers specifying kitchen pantry columns with wire baskets, plate racks, or shelved inserts should size the drawer box to the slide's 20 inch nominal length and bottom-mount geometry. This is an indoor slide for dry cabinet environments — it is not rated for exterior or high-moisture applications.
It depends on your cabinet construction. If the pantry column has a standard face frame or a countertop that overhangs the opening, full extension stops the drawer at the face and leaves the top of the pull-out partially blocked. The 1 inch of over-travel clears that obstruction, making the whole insert accessible. For recessed or inset applications where the face frame is shallow, standard full extension may be sufficient — but pantry columns specifically are the reason this slide class exists.
The slide has a mechanical detent that holds the drawer in the closed position until you pull it open — the drawer will not drift or roll out on its own. Anti-rebound means it also catches the drawer after a firm close so it does not bounce back open. This is not soft-close and it is not self-close: the drawer does not pull itself shut, and there is no damper. You push it closed, the detent grabs it, and it stays put.
This is a bottom-mount slide: it fastens to the bottom panel of the drawer box rather than the sides, so your carcase and drawer construction needs to accommodate that mounting geometry. The nominal length is 20 inches, so size your drawer box depth to match. Consult the Knape and Vogt installation guide for the 8000 series to confirm the box-width formula and mounting hole layout before building.
Confirm the sold-as unit — pair or each — on the product listing before ordering. Pantry slides in the 8000 series are typically sold as a pair, but verify the quantity shown at checkout so you order the right count for your project.
When the job calls for a pull-out that clears the cabinet face completely, carries a serious load, and stays put between uses, the 8000 series 20 inch over-travel slide is built for exactly that.
Sold In: 1 Set
