Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt 8000P is a 26 inch bottom-panel-mount pantry drawer slide engineered for heavy pantry pull-outs, tall cabinet drawers, and roll-out shelves that carry real weight. Ball-bearing construction, a 130 lb load rating per pair, and one inch of over-travel make it the working slide behind full-height pantry towers and kitchen pull-out organizers.
A 26 inch slide suits deep base cabinets and full-height pantry towers where a shorter slide leaves too much drawer inside the box. The one inch of over-travel goes to work in two situations: pantry cabinets with a face frame that would otherwise clip the front of a pull-out at full extension, and roll-out shelves loaded toward the front where every inch of clearance matters. Bottom-panel mounting fits tall, narrow pantry pull-outs where mounting on the side would conflict with dividers or wire baskets. The hold-in detent keeps the loaded pull-out from drifting open on its own — useful on a slide this long that carries this much weight.
The 8000P is built from steel with a zinc finish that protects the members through years of indoor service. Ball bearings running in full-length raceways keep travel smooth and even as the load grows; this is not a roller-wheel slide that softens under a full pantry load. The bottom-mount design puts the bearing system under the panel rather than beside it, which changes the load geometry for tall, narrow pull-outs and frees the full interior width for bins, baskets, and shelving.
Cabinet shops building pantry towers, kitchen designers specifying roll-out shelves for deep base cabinets, and contractors retrofitting pull-outs into existing tall pantry cabinets will all find the 8000P fits their load and depth requirements. At 130 lb per pair, it covers the heaviest residential pantry loads and light commercial storage applications. This slide is for indoor installations; it is not rated for wet, washdown, or exterior environments.
Yes. This 26 inch slide carries the drawer one inch past the cabinet face at full open, so the pull-out clears a face frame or countertop overhang that would otherwise block access at the front edge.
Side-mount slides fasten to the side faces of the drawer box and the cabinet interior wall. Bottom-panel mounting attaches the slide beneath the shelf or drawer panel, which is standard for pantry pull-outs that run full-width inside the cabinet and have no room for a side-mount slide on each side.
No. The hold-in anti-rebound detent is a mechanical catch that keeps the drawer from drifting or bouncing open after closing — it releases with a normal pull. It is not a keyed lock or a positive lock-out mechanism.
Confirm the sold-as unit on the product page before ordering. Pantry slides in this series are typically sold as a pair, but verify the pack quantity shown on the listing to be sure you receive the right count for your project.
When the pull-out is deep, the cabinet is tall, and the pantry is actually used, the 8000P 26 inch delivers the reach, the capacity, and the over-travel clearance to keep it working smoothly.
Sold In: 1 Set
