Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt 8000 series pantry drawer slide is a 12 inch, bottom-panel-mounted runner engineered for pantry pull-outs and heavy-load applications, rated 130 lb per pair with 1 inch of over-travel extension so the entire contents of the pull-out clear the cabinet face.
Pantry pull-outs are among the most demanding drawer applications in residential cabinetry: they carry more weight per unit area than a typical kitchen drawer, they open repeatedly under load, and the contents near the back have to be reachable. The over-travel design on this 12 inch slide solves the reach problem directly. The drawer member travels an inch past the nominal length, so items at the rear of the pull-out come fully forward even when the cabinet sits under a countertop overhang or behind a deep face frame.
The bottom-panel mounting position works well in pantry cabinets where interior width is precious. Because the slides attach under the pull-out floor rather than along its sides, the usable width of the box is not reduced by slide clearance on each side. This is especially useful in narrow pantry towers where every fraction of interior space counts.
Steel members with ball-bearing raceways carry the rated 130 lb load through repeated cycles without the deflection that nylon rollers show under heavy pantry loads. The anochrome zinc finish protects the steel in dry indoor service. This is an indoor slide for climate-controlled pantry, utility, and closet pull-out work — not rated for wet or exterior environments.
Cabinet shops building tall pantry towers and full-height pull-out units will find the 130 lb rating and over-travel combination a practical match for canned-goods and appliance pull-outs. The hold-in detent is a useful feature on pantry applications where a loaded pull-out might otherwise drift open on an uneven floor. The 12 inch nominal length suits shallow pantry bases and smaller pull-out units; the same 8000 series spans longer lengths for deeper cabinets. Residential installers and renovation contractors fitting out pantry cabinetry will recognize this series as a dependable bottom-mount workhorse at a practical price point.
Confirm the sold-as unit at checkout — the 8000 series is typically available as a pair, but verify the quantity shown on the product page before ordering to avoid a half-set.
No. The hold-in anti-rebound detent holds the pull-out closed and prevents bounce-back after closing. It does not lock the slide in the open position — the pull-out stays where you leave it when open, but there is no hold-out catch on this model.
A full-extension slide travels approximately its nominal length. This 8000 series slide adds 1 inch of over-travel beyond that, so the pull-out clears the cabinet opening by that extra inch — useful when a countertop overhang or deep face frame would otherwise block rear access.
The 8000 series is designed for bottom-panel mounting. In face-frame pantry cabinets, confirm that the mounting configuration and cabinet depth provide adequate rear support for the slide at this length. Rear support hardware requirements depend on your specific cabinet construction.
Yes — the 130 lb rating and over-travel extension also suit heavy utility drawers, appliance pull-outs, and base cabinet roll-outs where bottom mounting is preferred and the load exceeds what a standard 100 lb slide handles.
At 12 inches with 130 lb capacity and over-travel extension, this KV 8000 pantry slide covers the demanding end of shallow pull-out work — making rear contents reachable and keeping the pull-out firmly closed between uses.
Sold In: 1 Set
