Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Knape and Vogt 8000 series pantry drawer slide is a 22 inch, bottom-panel-mount runner built for pantry pull-outs and tall cabinet drawers that need to clear a countertop overhang or deep face frame. It runs on steel ball bearings, carries 130 lb per pair, and extends 1 inch past full travel so the contents at the back reach you, not the other way around.
Standard full-extension slides stop at the cabinet face. That is fine for a kitchen drawer — but a pantry pull-out loaded with canned goods, a spice tower, or a small appliance sits deeper in the box, and a frame or countertop edge can block access to the rear. The 8000P's 1 inch of over-travel pushes the drawer past that edge, putting the back row within reach without leaning in. The same extra inch matters in tall utility cabinets where the drawer front sits behind a face frame and needs to clear it fully before you can reach inside.
The hold-in anti-rebound detent is worth noting on a pantry application: a heavy load can push a free-sliding drawer back open if it isn't latched. This slide catches and holds the drawer shut until you pull it deliberately, which is the right behavior for a pull-out that may carry 80 or 90 lb of groceries.
The 8000 series is built from steel throughout, with a zinc anochrome finish that handles the humidity and temperature swings of a working kitchen or pantry cabinet. Ball bearings in the carriage provide even load distribution and a pull that stays smooth as the slide wears in — a meaningful quality point when the drawer cycles multiple times a day. The 22 inch length suits the interior depth of most standard base and pantry cabinets. Bottom-panel mounting positions the slide under the drawer box; build the box to the KV specification for this series to ensure the mounting geometry and box width are correct.
Cabinet shops and installers building pantry pull-outs, tall-cabinet drawers, or deep base-cabinet applications where full-extension travel isn't quite enough. Homeowners retrofitting a pantry cabinet who need a side-clearance-friendly bottom-mount slide at a capacity that covers real kitchen loads. The 130 lb per-pair rating puts this well above the standard 75 to 100 lb class, and the over-travel keeps it from being just another full-extension slide. If the job involves a heavy pull-out that needs to fully clear an overhang — a trash bin, a wine rack, a pantry organizer — this is the length and class to spec.
Per pair, which is how load ratings are stated throughout this slide category. Two slides working together carry 130 lb.
Side-mount slides fasten to the sides of the drawer box and the cabinet interior wall, requiring clearance on each side. Bottom-panel mounting attaches beneath the drawer box, which suits pantry-box construction and can work where side clearance is limited. Build the drawer box to the KV 8000 series specification for the correct fit.
It keeps the drawer closed — not locked. A deliberate pull releases it normally. It prevents the drawer from drifting open or rebounding after a firm close, but it is not a keyed or positive lock.
The 8000P is a bottom-panel-mount pantry slide. Whether it suits your face-frame installation depends on the cabinet's interior depth and the rear support available. Check the KV 8000 series installation guide for face-frame mounting requirements before ordering.
Hardware inclusion is not stated in the product data for this SKU. Confirm with the product listing or contact us before ordering if mounting hardware is not already on hand.
The 8000P gives deep pantry and tall-cabinet pull-outs the over-travel, capacity, and hold-in security to work cleanly in demanding kitchen builds — order the pair count your project needs and spec the box to KV's published dimensions.
Sold In: 1 Set
