Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 24 inch drawer slide gives a file drawer full extension, so the 24 inch length lets the drawer open its full depth for clear access to files at the back. This 8500 Series side mount drawer slide uses a ball bearing design, which supports smooth motion along the race so heavy file drawers move predictably along the cabinet. The slide is unhanded, so the same 8500B 24 model serves either side of the drawer and keeps planning straightforward on repetitive cabinet runs. A hold-in anti-rebound feature controls the drawer at the closed position, which reduces bounce back when a user pushes the drawer shut. Positive in and out stops set the travel limits, so the drawer stops consistently at full extension and full closure during everyday use. The slide is made in USA, which helps shops align this component with jobs that call out domestic manufacturing.
This 8500B 24 side mount drawer slide is part of the KV Model 8500 line, so it uses a 32 mm pattern that matches cabinet systems drilled on that standard for predictable mounting hole alignment. Side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side defines the space between the drawer box and cabinet, which guides case and drawer sizing on file cabinets. The recommended fasteners are #7 x 1/2 inch Phillips pan head screws, so shops can match that specification when fastening to cabinet members and drawer members. The listed height of 3-51/64 inch, including the quick disconnect rail, sets the vertical envelope the slide occupies, which is important when stacking multiple drawers in a single opening.
The KV 8500 file drawer slides in the 24 inch length are suited to file drawer applications where full extension is needed so users can reach files at the back without shifting folders forward. The side mount drawer slide format supports cabinets built around side-mounted runners, so cabinet makers can keep existing construction methods while upgrading to this 8500 Series configuration. The unhanded design means the same 8500B 24 slide model installs on either the left or right side, which helps reduce part numbers on shop shelves during volume file cabinet production. A 3-51/64 inch height profile including the quick disconnect rail gives enough structure to support file drawer loads while still fitting common drawer side dimensions in commercial cabinets.
The hold-in anti-rebound feature on this hold-in anti-rebound ball bearing slide helps keep drawers seated at the closed position, which improves consistency in rows of file cabinets where misaligned drawer fronts can distract in finished installations. Positive in and out stops define the endpoints of travel, so drawers stop cleanly instead of drifting beyond their intended limits during opening and closing. The ball bearing design with a retainer holding 3 bearings per inch of race supports smooth and quiet motion, which is useful in office environments needing low operating noise. Factory-attached drawer release clips with quick disconnect drawer members set up an installation where drawers can be lifted off for cabinet finishing or adjustment, then reinstalled on the same slide members without changing alignment. The 32 mm pattern coordinates with system drilling, so installers working on frameless cabinets can align mounting holes quickly.
The 8500B 24 is a Knape and Vogt 24 inch full extension, ball bearing, unhanded side mount file drawer slide, so it supports smooth travel and left or right side use.
The 8500B 24 requires side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side, which guides cabinet opening and drawer box width dimensions.
The 8500B 24 slide height is 3-51/64 inch including the quick disconnect rail, which defines the vertical space it occupies along the drawer side.
The 8500B 24 hold-in anti-rebound feature keeps the drawer at the closed position after pushing it shut, which reduces bounce back on frequently used file drawers.
The 8500B 24 uses recommended fasteners of #7 x 1/2 inch Phillips pan head screws, which suit attaching the cabinet member and drawer member to wood components.
The 8500B 24 uses a 32 mm pattern, which aligns with cabinets drilled on the 32 mm system for faster installation.
The Knape and Vogt 24 inch drawer slide in the 8500 Series combines full extension, side mount installation, and ball bearing motion, which fits file drawer layouts needing smooth, repeatable travel. With its 1/2 inch plus 1/32 inch minus 0 inch side clearance, 3-51/64 inch height, and 32 mm pattern, it aligns well with system-built cabinets. For file drawer projects that specify KV Model 8500 or require a 24 inch full extension side mount, this 8500B 24 configuration gives a defined set of dimensions and operating features to build around.
Sold In: 5 Set
