Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Knape and Vogt 8500 drawer slides give a 22 inch full extension travel, so a file drawer can open completely and expose the full interior for easier folder access and labeling work. The slide is a right hand side mount design, which anchors on the cabinet side and keeps hardware away from the drawer bottom where folders sit. A side clearance of 1/2 inch plus 1/32 inch minus 0 inch on each side sets a clear target for cabinet and drawer sizing, helping a shop cut parts so the slide tracks properly. The slide height of 3-51/64 inch, including the quick disconnect rail, defines the minimum interior height needed and helps when laying out drawer side depths. The ball bearing construction supports smooth motion, which matters when a file drawer is heavy and opened many times during daily use.
The 1/2 inch plus 1/32 inch minus 0 inch side clearance specification on each side gives a clear tolerance band, so installers can size drawers with confidence that the slide will run correctly. This slide height of 3-51/64 inch, measured with the quick disconnect rail, indicates how much vertical room the hardware occupies, which matters when stacking multiple file drawers in a single cabinet. The 32 mm pattern ties directly into system drilled case sides, letting shops use existing boring equipment instead of layout by hand. As a right hand side mount part, this member pairs with the matching left hand components in the same series, keeping alignment consistent from cabinet to cabinet.
The 22 inch length matches many standard-depth file cabinets, so this slide suits drawers designed for common letter or similar file depths. Because it is a right hand side mount cabinet member, it is used on the cabinet side of the drawer opening and works with the corresponding left hand cabinet member in a typical file setup. The full extension action means the drawer face travels completely out of the opening, which is useful when the cabinet is built into tight alcoves or under counters where access from above is limited. The Anochrome finish offers a straightforward metallic look, fitting into office casework or residential built-ins where exposed hardware edges may be visible when drawers are open. With a 32 mm pattern, the slide aligns with case sides drilled on that system, so it integrates smoothly into European-style carcasses and production cabinet lines.
The factory-attached drawer release clips with quick disconnect drawer members let the drawer be separated from the cabinet member without extra loose parts, which speeds removal during finishing, adjustment, or service. The hold-in feature is designed to prevent bounce back, keeping the drawer from rolling partially open after being pushed closed, which is important in file storage where fronts need to stay flush in corridors and offices. Positive in and out stops define clear travel limits for the drawer, helping protect both the slide and the cabinet from over-travel impacts. The retainer that holds three bearings per inch of race supports smooth, quiet motion along the full extension, which benefits installations where drawers are opened frequently throughout the day. Recommended fasteners are #7 x 1/2 inch Phillips pan head screws, so shops can match drilling and driver setups to that size during installation. This model 8500 is made in USA, providing a clear origin point for projects that specify domestic hardware in their documentation.
The Knape and Vogt 8500-98 22 slide has a 22 inch length, which sets the drawer depth and cabinet interior depth needed for full extension travel.
The slide requires 1/2 inch plus 1/32 inch minus 0 inch side clearance on each side, guiding drawer box sizing for smooth running without excessive play.
The 8500-98 22 uses a 32 mm pattern, which ties into system-drilled cabinet sides for faster, repeatable installation in production casework.
The hold-in feature on this drawer slide is designed to prevent bounce back, helping the file drawer stay closed after being pushed in.
Recommended fasteners are #7 x 1/2 inch Phillips pan head screws, aligning screw length and head style with the slide design.
The KV model 8500-98 22 slide is made in USA, which can align with project specifications that call for domestic hardware.
The Knape and Vogt 22 inch full extension hold-in anti-rebound ball bearing file drawer slide 8500 series right hand side mount zinc Q-Pack - 8500-98 22 combines defined side clearance, 32 mm pattern mounting, and quick disconnect members to support efficient, repeatable file drawer construction. For projects built around 22 inch deep, full extension file drawers, this slide offers a matched set of dimensions and features that align with production cabinet workflows and daily office use.
Sold In: 10 Each
