KV8500 22" Full Extension Hold-in anti-rebound Ball Bearing File Drawer Slides, Unhanded Side Mount Zinc Poly-Pack - 8500P 22
Description
Knape And Vogt 22 Inch Drawer Slide Use
Knape and Vogt 22 inch drawer slide 8500P 22 is a full extension, side mount, ball bearing file drawer slide built for projects using the KV Model 8500 system. Full extension travel lets the drawer open its full length, which exposes file contents for straightforward access and labeling work. The side mount layout sets the slide on each cabinet side, which suits standard file drawer construction in casework and office cabinetry. This drawer slide is unhanded, so the same member works on either side of the drawer, which keeps parts management simple for repeat installations and service work. Ball bearing construction supports smooth motion under load, which helps drawers travel without sticking during daily use. The slide height of 3-51/64 inches, including the quick disconnect rail, defines the space it requires along the drawer side for planning drawer box heights.
File Drawer Slide Details That Support Work
- Full extension design allows the drawer to travel its complete length, which exposes hanging files and stored material so contents can be reached without shifting folders around the opening.
- Hold-in anti-rebound feature is built into the slide to prevent bounce back, which helps the drawer stay in the closed position in typical office use after being pushed shut.
- Positive in and out stops are integrated into the slide, which limit travel at both ends so the drawer does not overtravel and can be stopped consistently during each cycle.
- Retainer holds three bearings per inch of race in the slide, which supports smooth and quiet motion by distributing the moving load along the length of the ball bearing track.
- Factory attached drawer release clips on the quick disconnect drawer members are part of the design, which allow the drawer to be disconnected for cabinet work or service without separate clip installation steps.
Side Mount Installation And Clearance Details
This Knape and Vogt 8500 Series file drawer slide is configured as a side mount slide, so it installs against the cabinet side panels in typical casework. The specified side clearance is 1/2 inch plus 1/32 inch minus 0 inch on each side, which defines the gap between the drawer side and cabinet side that the installer builds into the cabinet opening. Using that clearance spec keeps the ball bearing members running in line, which supports smooth travel over the life of the drawer. The slide uses a 32 mm pattern, so its mounting holes align with layouts based on the 32 mm system in cabinet parts. The recommended fasteners are #7 by 1/2 inch Phillips pan head screws, which match the slide holes and help seat the slide firmly to metal or wood cabinet members.
Using This 8500 Series File Drawer Slide
Where This Side Mount Slide Is Applied
The Knape and Vogt 8500 Series file drawer slide in 22 inch length is intended for file drawer applications, so it fits projects where drawers need full access for letter or similar formats. Its side mount classification fits casework where the slide mounts directly to cabinet side panels, which is common in office furniture and storage units. The specified slide height of 3-51/64 inches including the quick disconnect rail guides planning for drawer box sides, because the drawer side needs enough height to accept the drawer member without conflict with the bottom or top. The 32 mm pattern on this slide coordinates with cabinets drilled on 32 mm centers, which allows the installer to locate the slide using pre-bored holes in cabinet components. The unhanded design suits both left and right installation using the same model, which can reduce on-site part sorting when multiple drawers are outfitted.
Details That Support Consistent Drawer Results
The side clearance rating of 1/2 inch plus 1/32 inch minus 0 inch on each side is central to how this slide performs, because that tolerance band defines the opening width that lets the ball bearing members move without binding. Planning the cabinet to that clearance keeps the bearing race loaded correctly, which supports smoother cycling when drawers are full of files. The hold-in anti-rebound feature is designed into the mechanism, so when the drawer is pushed shut the slide resists springing forward again, which helps file fronts stay flush in banked installations. Positive in and out stops limit travel at both ends, which protects the members from being pulled apart under normal operation. The retainer that holds three bearings per inch of race distributes rolling elements along the track, so as the drawer moves the load transfers gradually, supporting quiet travel. Factory attached drawer release clips with quick disconnect drawer members are built into this model, which allows the drawer to be removed from the cabinet by operating the release instead of detaching the slide from the casework.
Common Questions About KV 8500P 22 Use
What type of drawer is the KV 8500P 22 designed for?
The KV 8500P 22 drawer slide is described as a file drawer slide, so it is intended for applications where drawers hold files and need full extension for access.
How does the hold-in anti-rebound feature affect operation?
The hold-in anti-rebound feature on this slide prevents bounce back after closing, which helps the file drawer stay in the closed position during normal use.
What side clearance is required for this drawer slide?
The Knape and Vogt 8500P 22 slide uses 1/2 inch plus 1/32 inch minus 0 inch side clearance on each side, which defines the opening size needed for proper slide travel.
Does the KV 8500P 22 use a 32 mm mounting pattern?
The KV 8500P 22 drawer slide is specified with a 32 mm pattern, so its mounting holes align with cabinet systems drilled on 32 mm centers.
What fasteners are recommended for mounting this slide?
The recommended fasteners for the 8500 Series slide are #7 by 1/2 inch Phillips pan head screws, matching its mounting holes for secure attachment.
How is the drawer disconnected on the 8500 Series slide?
The 8500 Series slide has factory attached drawer release clips with quick disconnect drawer members, allowing the drawer to be removed using the built-in release.
Selecting This 22 Inch File Drawer Slide
The Knape and Vogt 8500P 22 full extension, side mount file drawer slide in Anochrome finish combines a 22 inch length with ball bearing motion, hold-in anti-rebound, and positive stops. These elements support file drawer projects where smooth travel, full access, and stable closing are needed in a 32 mm pattern cabinet layout. At Wurth Baer Supply, this made in USA KV Model 8500 slide is presented for woodworking professionals building or refitting file storage casework using #7 by 1/2 inch Phillips pan head screws for installation.
