Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
8 x 12 SpeedBrace shelf bracket describes a Fastcap workstation and countertop support sized for 8 inch by 12 inch applications, so installers can match the bracket footprint to typical counter and shelf depths. The black finish gives a clean, uniform look that blends with many shop, garage, or workstation layouts, which helps projects look intentional instead of improvised. As a work station and countertop bracket, this Fastcap part is built to carry structural duty in benches, counters, and storage runs where brackets see regular use. The SB-8X12BL designation ties this bracket to its specific 8 inch by 12 inch size and finish, which matters when coordinating multiple brackets across a job. Within shelf, closet, and garage organization work, this bracket supports counters, tops, or heavy shelving where a compact but strong support is preferred.
The 1-1/2 inch x 1-1/2 inch notching system on this Fastcap 8 inch x 12 inch SpeedBrace shelf bracket provides consistent reference points along the bracket, which helps align each piece on layout marks without additional jigging. That same notching pattern supports quick installation because the installer can drop the bracket to the marks and fasten through the countersunk screw holes with minimal adjustment. The ability to orient the bracket using either the long or short side lets this part act as a flexible support in different shelf or countertop depths, which matters when mixing work surfaces and storage shelves in the same run. When FASB Anchors are used with metal studs, the bracket system is suited to common light commercial or residential metal-stud walls, supporting counters and shelves on that framing type.
This 8 inch x 12 inch SpeedBrace shelf bracket works within shelf, closet, and garage organization projects where a compact but strong support is needed under worktops or shelves. As part of the work station and countertop brackets class, it is suited to benches, counters, and similar surfaces that carry regular weight in shops or garages. The 1-1/2 inch x 1-1/2 inch notching system helps when laying out a line of brackets along a wall cabinet run or workbench, so each bracket lands consistently under the top. Cable management holes support installations with power strips, chargers, or equipment wiring, keeping cables routed along the bracket path instead of sagging below the work surface.
The load rating at 1,000 lb per pair gives a defined performance target when planning bracket spacing, which supports predictable results across multiple stations or bays. Countersunk screw holes keep fastener heads seated below the surface of the bracket, which helps finished counters and shelves slide into place without interference at those connection points. The option to orient the bracket with either the long or short side outward lets installers adapt one SB-8X12BL part number to varying depths, which simplifies stocking and reduces the need to keep several different bracket sizes for similar tasks. When FASB Anchors are paired with metal studs, the system provides a matched anchor approach for that framing type, simplifying repeat installations in projects built on metal-stud walls.
The SB-8X12BL is an 8 inch x 12 inch Fastcap SpeedBrace shelf bracket in black finish, used as a workstation and countertop bracket in shelf, closet, and garage organization projects.
This 8 x 12 SpeedBrace shelf bracket has a load rating at 1,000 lb per pair, which supports heavy countertops, work surfaces, or shelving when planned around that rating.
The 1-1/2 inch x 1-1/2 inch notching system provides consistent reference points, allowing quick alignment and installation without repeatedly remeasuring each bracket location.
The countersunk screw holes let screws sit flush with the bracket surface, improving clearance under shelves or countertops and reducing snag points during use.
The cable management holes provide paths for routing cables along the bracket, helping organize power and data lines along workstations or shelving installations.
This Fastcap SpeedBrace works with FASB Anchors that are designed to be used with metal studs, supporting installations on metal-stud framed walls.
The Fastcap 8 inch x 12 inch SpeedBrace shelf bracket in black finish combines a 1,000 lb per pair load rating with a 1-1/2 inch x 1-1/2 inch notching system, which helps installers support heavy countertops or shelves while keeping layout consistent. Cable management holes and countersunk screw holes add wiring control and fastener clearance under worktops, which suits shop, closet, and garage organization work. When projects involve metal-stud framing, its use with FASB Anchors designed for metal studs ties this SB-8X12BL bracket directly to that wall type, offering a straightforward choice for workstation and countertop support.
Sold In: 1 Each
