
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
15 x 18 SpeedBrace shelf bracket from Fastcap is a workstation and countertop bracket set up for high-load support in shop, residential, or light commercial layouts. The bracket is part of Fastcap's Workstation and Countertop Brackets product class, so it is built for structural support rather than light-duty shelving. A load rating at 1,000 lb per pair means that, when used as a system, two brackets can carry substantial static weight, which matters when you are supporting countertops, benches, or deep shelving where deflection would be a problem. The black finish gives the bracket a clean, low-visibility look under dark tops or shelves, so it blends into many cabinet and workspace designs while still doing the structural work.
The 1-1/2 x 1-1/2 notching system for quick alignment and installation ties bracket placement to a regular grid, so you can align several 15 x 18 SpeedBrace shelf bracket units along studs or blocking with consistent spacing. Because the bracket has countersunk screw holes, fasteners sit below the bracket surface, letting the supported shelf or countertop sit tight to the steel without rocking on screw heads. FASB Anchors are designed to be used with metal studs, so when you are working in metal-framed walls the anchor and bracket system work together to transfer the load into the stud. Cable management holes built into the bracket also give you a defined route for low-voltage or power cables, which can simplify layout when you are placing outlets or devices near the support.
This Fastcap 15 x 18 SpeedBrace shelf bracket is categorized as a Workstation and Countertop Bracket, so it is suited to applications where a top, bench, or deep shelf needs structural steel support rather than decorative hardware. The load rating at 1,000 lb per pair lets you design for heavy, static loads such as tools on a workbench, dense storage on garage shelving, or appliances on a counter run without relying solely on cabinetry. Because the bracket can be oriented using either long or short side, br, you can choose whether the long leg supports a deeper top projection or runs down the wall for added bearing length, which helps tune the fit to the specific installation geometry.
The 1-1/2 x 1-1/2 notching system for quick alignment and installation gives fixed reference points, which helps you repeat bracket locations across multiple bays so tops land level and straight. When you pair this notching system with the countersunk screw holes, fasteners draw the bracket snug to framing while staying out of the way of the shelf or counter, which reduces the chance of high spots that could telegraph through the surface. Cable management holes built into the bracket let you route cables along the support path instead of across open spans, which keeps wiring gathered close to the structural member. FASB Anchors designed to be used with metal studs tie the bracket into steel framing, so the load from the bracket transfers into the stud system as intended in metal-framed walls.
The 15 x 18 SpeedBrace shelf bracket has a load rating at 1,000 lb per pair, which supports design decisions for heavy countertops, work surfaces, or deep shelving that must carry substantial static weight.
The 1-1/2 x 1-1/2 notching system for quick alignment and installation sets the bracket on fixed increments, helping keep multiple brackets aligned and level along studs or blocking.
The bracket's countersunk screw holes let screws sit flush with the surface, so shelves or countertops rest directly on the bracket without rocking on exposed fastener heads.
FASB Anchors are designed to be used with metal studs, so the bracket can be anchored into metal-framed walls where that anchoring system is applied.
The bracket can be oriented using either long or short side, br, allowing you to choose projection depth and leg length on the wall to match the supported top geometry.
Cable management holes in the bracket give dedicated paths for routing cords and wiring along the support, helping keep cables organized near counters, workstations, or equipment shelves.
The Fastcap 15 x 18 SpeedBrace shelf bracket with black finish combines a load rating at 1,000 lb per pair with a 1-1/2 x 1-1/2 notching system for quick alignment and installation, countersunk screw holes, and cable management holes. For workstation, countertop, or shelving projects where structural support, alignment, and cable routing all matter, this bracket provides defined performance and layout features for building solid, organized installations.
Sold In: 1 Each