Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Fastcap Speed Brace 21x24 primed is a rigid, heavy duty shelf and countertop support designed as a workstation and countertop bracket. The 21 inch by 24 inch sizing creates a substantial bearing surface, which helps support deep countertops, workstations, or shelves in shop, office, or garage layouts. A 1,000 lb per pair load rating provides high capacity, so pairs of brackets handle heavy materials, tools, or equipment in demanding woodworking or commercial environments. The primed finish prepares the steel surface for painting, allowing the brace to blend into finished cabinetry, wall color, or brand colors on job sites. As part of Fastcap workstation and countertop brackets, this Speed Brace fits projects where strong, unobtrusive wall support is needed for tops, benches, or display surfaces without adding floor legs.
This Fastcap shelf and countertop support uses a 1-1/2 inch by 1-1/2 inch notching system for quick alignment and installation, so brackets line up consistently on studs or ledger members using a predictable layout. The notching gives clear reference points that speed layout when multiple brackets support a long counter or bench. Cable management holes built into the brace let installers route wires or low-voltage lines through the bracket body, keeping cords near the wall instead of draping below the work surface. Countersunk screw holes present fastener heads below the surface of the steel, helping screws sit flush against studs or substrates for tight contact and a cleaner look. FASB Anchors are designed to be used with metal studs, and this compatibility supports installations where wall framing is steel instead of wood. The brace can be oriented using either the long or short side, giving flexibility to match support direction to the countertop or shelf projection.
This Fastcap workstation and countertop bracket fits shelf, closet, and garage organization projects, as well as general shelving and accessories installs, because it is built as a rigid, heavy duty support. The 21 inch by 24 inch format pairs well with deeper worktops, counters, or heavy-duty shelves that need substantial projection from the wall. A 1,000 lb per pair load rating makes the Speed Brace suitable for supporting workstations holding tools, components, or stacks of material without relying on front legs, which helps keep floor areas clear. Because FASB Anchors are designed to be used with metal studs, this Speed Brace suits commercial interiors or tenant build-outs framed with steel where a consistent anchoring method is needed. Cable management holes tie it to environments with electronics, chargers, or equipment where cords run under the countertop but need a controlled path near the wall line.
The 1-1/2 inch by 1-1/2 inch notching system on this Fastcap Speed Brace gives installers a repeatable reference when laying out multiple brackets, which helps keep worktops flat and prevents twist along long runs. Using those notches for layout ties bracket position directly to framing or ledger locations, which simplifies transferring measurements across a wall. Countersunk screw holes seat heads into the steel, allowing tight clamping of the bracket to studs or structural members and helping reduce any rocking under load. When paired with FASB Anchors that are designed for metal studs, the brace integrates into steel-framed walls in a predictable way, which is useful in commercial build-outs and multi-unit projects. The primed finish sets up the surface for paint so that, after mounting, trades can coat the bracket to blend into surrounding finishes, keeping visible support hardware subdued on finished counters, displays, or shelves.
The product is a 21 inch by 24 inch rigid, heavy duty shelf and countertop support, which gives a large bearing area under deeper shelves, counters, or work surfaces.
The Fastcap SB-21X24PRIMED Speed Brace has a 1,000 lb per pair load rating, allowing pairs of brackets to support heavy countertops, workstations, or shelving runs.
The 1-1/2 inch by 1-1/2 inch notching system gives fixed reference points for mounting, which simplifies aligning multiple brackets and keeps countertop or shelf runs even.
This Fastcap Speed Brace is matched with FASB Anchors that are designed to be used with metal studs, supporting installations on steel-framed walls.
The cable management holes allow routing of wires or cords along the brace, which helps keep cables close to the wall under countertops or work surfaces.
The countersunk screw holes let screw heads sit within the steel surface, improving contact with studs or substrates and giving a neater finished appearance.
The Fastcap shelf and countertop support SB-21X24PRIMED combines a 1,000 lb per pair load rating, a rigid, heavy duty design, and a 21 inch by 24 inch format to handle substantial worktops or shelves. The 1-1/2 inch by 1-1/2 inch notching system, cable management holes, and countersunk screw holes are built for quick alignment and clean installs on stud walls, including projects using FASB Anchors with metal studs. For jobs needing primed, paintable workstation and countertop brackets from Fastcap, this Speed Brace offers a defined, repeatable solution.
Sold In: 1 Each
