Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
15 x 18 SpeedBrace shelf bracket from Fastcap is a workstation and countertop bracket designed to support demanding shelf and counter runs. The bracket load rating at 1,000 lb per pair provides substantial support capacity, which matters when planning garage, shop, or utility shelving that carries dense materials or heavy tools. The bracket uses a 1-1/2 x 1-1/2 notching system for quick alignment and installation, so layout and repeat positioning are simplified on site. The bracket has cable management holes, allowing cables and cords to be routed directly through the bracket area to keep work surfaces clearer. Countersunk screw holes in the bracket seat fasteners below the surface, which helps the bracket sit flush against mating material and reduces snag points. A primed finish on the bracket surface prepares it for job-specific topcoats, which helps integrate brackets into finished interiors and work areas.
The 1-1/2 x 1-1/2 notching system for quick alignment and installation gives this Fastcap SpeedBrace a regular reference grid, which helps installers align multiple brackets along a wall or cabinet run. When notches match across brackets, spacing adjustments are easier to repeat across several supports. The countersunk screw holes concentrate fastener placement into set locations, so drilling and driving follow a predictable pattern from bracket to bracket. The bracket can be oriented using either long or short side br, letting the installer set the 15 in or 18 in leg horizontally depending on shelf depth or support geometry. Using the long or short side as needed helps adapt one bracket size to different shelf or overhang dimensions within a project.
This 15 x 18 SpeedBrace shelf bracket from Fastcap sits in the workstation and countertop brackets class, so it fits jobs where shelves or counters need structural support against walls or cabinets. The bracket load rating at 1,000 lb per pair means it can be planned into shop, garage, or utility layouts that require significant load capacity on a limited number of supports. The 1-1/2 x 1-1/2 notching system for quick alignment and installation ties into wall framing or cabinet backs that follow standard spacing, helping installers register bracket positions relative to studs or internal structural members. Cable management holes let this bracket work in stations that use powered tools or electronics, because cords can pass through the support instead of running over edges. FASB Anchors are designed to be used with metal studs, so this bracket system can be integrated into wall systems framed with metal studs where anchor compatibility is required.
The consistent 1-1/2 x 1-1/2 notching system in this SpeedBrace creates predictable bracket-to-structure engagement, which reduces layout variation when multiple brackets support a long countertop or shelf. Having cable management holes in each bracket allows cable routing to follow the same path at every support, simplifying later service or reconfiguration of powered equipment. Countersunk screw holes give installers fixed fastener locations and seating depth, which helps create a uniform bearing surface between the bracket and mounted material along the entire run. The bracket can be oriented using either long or short side br, allowing installers to standardize on this 15 x 18 pattern while still setting different shelf depths or overhangs in separate zones. Within the workstation and countertop brackets class, the SB-15X18PRIMED configuration offers a primed finish ready for job-applied coating, which supports consistent final appearance while retaining the structural geometry that installers expect.
The 15 x 18 SpeedBrace shelf bracket has a load rating at 1,000 lb per pair, which lets planners assign substantial weight to each pair of brackets in a shelving or countertop run.
The 1-1/2 x 1-1/2 notching system for quick alignment and installation provides repeating reference points, helping installers locate and align multiple brackets along framing or cabinet structures.
This SpeedBrace works with FASB Anchors that are designed to be used with metal studs, allowing the bracket system to integrate into metal stud wall construction.
Countersunk screw holes let fastener heads sit below the bracket surface, helping the bracket bear evenly against shelves or countertops and reducing snag points along the support.
The cable management holes allow routing of cords and wiring through the bracket space, keeping cables closer to structure so work surfaces stay clearer and easier to work on.
The primed finish on the SpeedBrace surface prepares the metal for finish coats, so brackets can be finished to coordinate with surrounding cabinetry, walls, or countertops.
The Fastcap 15 x 18 SpeedBrace shelf bracket, SB-15X18PRIMED, combines a load rating at 1,000 lb per pair with a 1-1/2 x 1-1/2 notching system for quick alignment and installation, which supports demanding shelving or countertop layouts. Cable management holes and countersunk screw holes streamline both wiring paths and fastener placement, which can help keep workstations organized and structurally consistent. FASB Anchors are designed to be used with metal studs, so this bracket system can be planned into wood or metal stud projects that need defined structural support points. With its primed finish ready for topcoat, this workstation and countertop bracket can be integrated into functional and finished spaces where appearance and load capacity both matter.
Sold In: 1 Each
