Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
21 x 28 SpeedBrace shelf bracket describes a Fastcap bracket sized for substantial shelf, workstation, or countertop runs where solid support is needed. The product sits in the Workstation and Countertop Brackets class, so it is built to carry structural loads in those applications rather than light-duty storage. A 1,000 lb per pair load rating defines its capacity, which allows the bracket to support demanding setups when paired correctly under a run. The bracket uses a 1-1/2 x 1-1/2 notching system for alignment and installation, so the installer can seat the bracket repeatedly in a predictable position along framing or support members. The white finish identifies the visual look, which helps it blend into light-colored shelving or work surfaces in shops, garages, and workstations.
The 1-1/2 x 1-1/2 notching system built into this Fastcap SpeedBrace shelf bracket establishes a simple way to align the bracket along framing, because the repeated notch dimensions can follow the same reference marks on studs or rails. Countersunk screw holes in the bracket allow fasteners to sit flush inside the metal, so the contact face against the shelf underside or countertop bottom remains smooth and fully supported. FASB Anchors are designed to be used with metal studs, so when a wall is framed in metal, the anchor and bracket combination ties the load back to those studs rather than only to surface materials. Because the bracket can be oriented using either the long or short side, installers can adapt the same model to different overhang depths or shelf projections in the same project.
This Fastcap 21 x 28 SpeedBrace shelf bracket is classified as a Workstation and Countertop Bracket, which positions it for use under work surfaces, countertops, and substantial shelving where a rigid support leg is needed. The 21 in by 28 in sizing gives the installer two different projection options depending on orientation, so a deeper countertop or a shallower shelf can be supported by rotating the bracket. The 1,000 lb per pair load rating defines a high load capacity when brackets are used in pairs, making them suitable for runs where equipment, materials, or heavy items will rest on the surface. The white finish works well anywhere a light-colored bracket is preferred, so the support can visually blend into white or light-toned shelving, cabinets, or workstation structures.
The 1-1/2 x 1-1/2 notching system for quick alignment and installation gives a clear mechanical reference point at each bracket, so spacing and vertical alignment across multiple brackets remain consistent from one bay to the next, which helps tops sit flat. Cable management holes along the bracket allow power cords or low-voltage lines to pass through the support member, which keeps them protected within the bracket profile and helps maintain a cleaner underside around workstations or counters. Countersunk screw holes provide a seat for flat-head fasteners, so fastener heads do not protrude into the bearing surface, allowing tighter contact between the bracket and shelf or top for better load sharing. FASB Anchors are designed to be used with metal studs, so when walls or partitions are framed in metal, the bracket and anchor pairing delivers a direct connection into the stud structure for predictable support. The option to orient the bracket using either the long or short side lets one part number handle different projection needs, which simplifies product selection when a project mixes deeper work surfaces with shallower shelves.
The Fastcap SB-21X28WH SpeedBrace shelf bracket has a load rating at 1,000 lb per pair, which supports heavy-duty shelving, countertops, or work surfaces when brackets are paired appropriately under the load.
The 1-1/2 x 1-1/2 notching system provides fixed reference points on the bracket, so installers can line up each bracket on a repeating grid, keeping shelves and countertops level along the entire run.
This SpeedBrace works with FASB Anchors that are designed to be used with metal studs, so the bracket can be tied directly into metal stud framing for structural support in those wall systems.
The cable management holes let installers route cords or wiring through the bracket body, which organizes cables under shelves or counters and keeps them away from edges and work areas.
The countersunk screw holes recess compatible screw heads into the bracket, so the surface contacting the shelf or countertop stays smooth and fully supported without interference from raised fasteners.
This 21 x 28 SpeedBrace shelf bracket can be oriented using either the long or short side, which lets installers support deeper tops or shallower shelves with the same bracket model.
The Fastcap 21 x 28 SpeedBrace shelf bracket, part number SB-21X28WH, combines a 1,000 lb per pair load rating with a 1-1/2 x 1-1/2 notching system, cable management holes, and countersunk screw holes to streamline structural shelf or countertop projects. FASB Anchors designed for metal studs extend its use into metal-framed walls, while the option to orient the bracket by the long or short side lets one part support different depths in the same job. For workstations, countertops, or shelving that demand both capacity and clean layout, this SpeedBrace aligns well with professional installation workflows.
Sold In: 1 Each
