Berenson Andante Series 5-1/16" (128 mm) Center to Center Dull Bronze Pull, - 3008-1DBZ-P

Berenson Andante 128mm Dull Bronze Pull For Cabinets

Berenson Andante 128mm dull bronze pull is a zinc die cast cabinet handle designed for use on doors and drawers where a 5-1/16 inch center to center layout is required. The 5-11/16 inch overall length gives you a full hand grip across wider drawer fronts, which helps when moving loaded drawers or tall doors. A 1-1/4 inch projection spaces the hand away from the cabinet face, supporting comfortable pulls without knuckles contacting the surface. The 5/8 inch width offers a slim profile, so the pull works on narrow rails while still presenting a defined gripping edge. The dull bronze finish provides a muted metal look that suits decorative cabinet hardware installations where a softer, less reflective tone is preferred.

Key Andante Pull Details For Cabinet Projects

• The zinc die cast material creates a solid-feeling pull body, which supports repeat use on active kitchen and bath cabinets where handles are operated many times a day.
• The dull bronze finish delivers a consistent, subdued color tone, which helps maintain a unified appearance across multiple cabinet fronts using the same hardware line.
• The 5-1/16 inch (128 mm) center to center drilling matches common cabinet boring dimensions, which matters when laying out new fronts or aligning with existing hole patterns.
• The 5-11/16 inch overall length spans more of the drawer or door width, which provides a stable grip point toward the center of wider faces.
• The 1-1/4 inch projection holds the pull off the surface at a practical distance, which provides finger clearance without the handle protruding excessively into walkways.
• The 5/8 inch width keeps the pull visually light on smaller doors, which helps it sit neatly within narrow stiles or rail sections.

Mounting Dimensions That Guide Handle Placement

The 5-1/16 inch (128 mm) center to center dimension on this Berenson Andante pull establishes the drilling pattern, so the handle aligns along a straight line for a clean install. The 5-11/16 inch overall length sets how far the pull extends across the cabinet front, which influences where it can be positioned on narrow rails. A 1-1/4 inch projection from the door or drawer face defines the working clearance behind the pull, which supports comfortable hand access without requiring deep recesses. The 5/8 inch width determines how much surface area the pull covers on the stile or drawer header, which helps when balancing sightlines across a row of fronts.

How This Berenson Andante Pull Fits Real Jobs

Where The 128mm Andante Pull Is Typically Used

The Andante Series 5-1/16 inch (128 mm) center to center dull bronze pull is suited to cabinet doors and drawers laid out on a 128 mm boring pattern. In residential or light commercial cabinet runs using that spacing, the 5-11/16 inch length allows the pull to sit proportionally on both base and wall cabinets. On deeper drawer boxes, the same length provides a centered grip that feels balanced across the face. The dull bronze finish works in decorative hardware and moldings settings where a bronze tone is part of the design palette. Because the pull belongs to the Berenson Andante collection, it can be used where a consistent series look is desired across multiple openings.

Why These Dimensions Support Consistent Results

The 5-1/16 inch (128 mm) center to center measurement gives a precise distance between mounting points, which simplifies repeating the same layout across banks of doors and drawers. Using the same 128 mm spacing on each front helps keep hardware perfectly aligned in long runs. The 5-11/16 inch overall length means that when the holes are drilled at the 128 mm pattern, there is consistent handle overhang beyond each hole, which creates even sightlines around the grip. A 1-1/4 inch projection ensures that when doors are opened, the hand contact point stays comfortably off the surface, which reduces contact marks around the pull area. The 5/8 inch width means that when several Andante pulls are installed side by side, the handles present a uniform, narrow band of hardware that reads consistently from cabinet to cabinet. The zinc die cast construction gives the pull a defined shape with crisp edges, which helps the grip feel predictable wherever it is mounted along the run.

Common Questions About This Berenson Andante Pull

Selecting This Andante Pull For Cabinet Runs

The Berenson Andante Series 5-1/16 inch (128 mm) center to center dull bronze pull brings a defined set of working dimensions to cabinet hardware layouts. With its zinc die cast construction, 5-11/16 inch length, 1-1/4 inch projection, and 5/8 inch width, the pull supports consistent hole spacing and a comfortable hand grip across doors and drawers using a 128 mm pattern. For cabinet projects built around dull bronze decorative hardware, this Andante pull offers a coordinated option for aligning appearance and drilling details across a full run.