Blum #6 x 1/2" Flat Head Wood Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 28004733 - 1000/Box

A Short-Reach Wood Screw Built for Thin Cabinet Panels and Hardware Mounting

The Blum #6 x 1/2" flat head wood screw is a compact fastener sized for hardware installation and trim attachment where full panel depth is not available. With a Phillips drive, coarse thread, sharp point, and Nickel finish, it fits the range of shallow fastening tasks that come up routinely in cabinet assembly and installation.

Key Features

• #2 Phillips drive accepts a standard #2 Phillips bit, the most common bit in any installer's kit.
• Flat head profile sits flush with the surface when driven into a countersunk hole.
• Coarse thread grips wood, plywood, and other wood-based panel materials securely.
• Sharp point self-starts in most wood and composite substrates without a pilot hole in lighter work.
• Nickel finish blends with Nickel-finished cabinet hardware for a consistent appearance on visible surfaces.
• Packed 1000 to the box for shops and installers who go through installation screws in volume.

Where the 1/2" Length Earns Its Place

Half an inch of screw length is a deliberate choice, not a compromise. In cabinet work, hardware plates, mounting clips, and accessory brackets often attach to panels that are 3/4" thick or less. A longer screw risks breaking through the back face or into an adjacent component. This screw threads in securely without over-penetrating, making it a reliable fit for hinge base plates, drawer slide clips, shelf hardware, and other fittings that attach to the face or side of a cabinet panel. It is also practical for thin overlay applications and face-frame trim where depth is limited from the start.

Finish, Head, and Material Details

The Nickel finish coordinates with Blum hardware and other Nickel-tone fittings, so the screw head stays visually quiet on interior cabinet surfaces. The flat head countersinks flush, leaving a smooth surface that does not catch on drawer boxes or cabinet interiors. Coarse thread on a #6 shank provides enough holding power for the light-to-medium loads typical of hardware attachment and trim work indoors.

The Right Installer for This Screw

Cabinet shops running Blum hardware will find this screw sized and finished to match. Installers setting hardware on finished cabinet interiors benefit from the Nickel head that disappears against the fitting. The 1000-piece box suits production environments where installation screws run out quickly and re-ordering mid-job is a disruption. Renovation contractors and custom shops doing lower-volume work will find the box keeps them stocked through multiple installs without excess.

Common Questions

Keep the Install Moving Without Over-Thinking the Fastener

When the hardware calls for a short, flush-seated screw with a finish that matches the fitting, this Blum #6 x 1/2" flat head screw is the direct answer. A box of 1000 means the screw bin stays full through the jobs that matter.