Blum #6 x 5/8" Flat Head Wood Screw Phillips Drive - Sharp Point Coarse Thread Nickel, 28005893 - 1000/Box

5/8-Inch Wood Screw for Flush Hardware Mounting in Finished Cabinetry

The Blum #6 x 5/8" flat head wood screw is a short, purpose-sized fastener for mounting cabinet hardware — hinges, slides, and similar components — directly onto finished panel and face-frame surfaces where the screw must sit fully flush. The Phillips drive, coarse thread, and sharp point suit the range of materials found in cabinet assembly and installation. Sold in a box of 1000.

Key Features

• Flat head with flush seating countersinks into the mounting hole and sits level with the surrounding surface.
• #2 Phillips drive is compatible with the most common driver bits in shop and field kits.
• Coarse thread grips wood, plywood, and particleboard without stripping in shallow engagement.
• Sharp point self-starts in pre-drilled hardware mounting holes without additional preparation.
• Nickel finish blends with Blum hardware and bright-metal fittings in cabinet interiors.
• 1000-piece box supports volume hardware installation across a full cabinet run.

Where 5/8-Inch Matters in Cabinet Hardware Work

Most European cup hinges, drawer slides, and face-frame clips are factory-drilled for screws in the 5/8-inch range. At that length, the screw engages enough material in a 3/4-inch panel to seat firmly without penetrating through the back face. This makes the 5/8-inch length the right choice when the hardware mounts directly to a finished or visible panel face and a longer screw would risk breaking through. It is also the practical size for face-frame stock where hardware sits close to the front edge and depth is limited.

Finish and Construction

The nickel finish coordinates with the bright silver and nickel-toned hardware in the Blum product line, so screw heads visible inside a cabinet interior do not stand out against the hinge plates or slide bodies. The coarse-thread carbon steel construction provides reliable grip in the wood-based substrates — solid wood, plywood, and particleboard — that make up most cabinet carcass and face-frame work. This screw is for dry interior applications.

Who Reaches for This Box

Cabinet shops installing Blum hinges and drawer hardware at volume keep this box on hand as the matched fastener for their hardware line. Installers completing a kitchen or bath build-out on site use it when hardware needs to be pulled off and reinstalled and the original screws have gone missing. The 1000-piece count suits production use where running out mid-job is a real cost, and the Phillips drive means any technician with a standard bit can complete the work without a special tool.

Common Questions

The Right Screw Keeps the Hardware Tight and the Panel Clean

When the length, head, and finish are matched to the hardware, installation goes faster and finished surfaces stay intact. This Blum #6 x 5/8" flat head screw is sized for exactly the hardware mounting work it is sold to do.