Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Blackrock appliance pull is a zinc die-cast handle in a black bronze finish built for appliance-size fronts and oversized cabinet doors. The 12 inch (305 mm) center-to-center mounting spreads the load across a wider span, which helps when you are moving heavier panels. The overall length of 13-5/16 inches (338 mm) gives a substantial grip area, useful on tall doors or appliance panels where multiple hand positions are common. A projection of 1-11/16 inches (43 mm) stands the handle off the face, giving space for fingers without crowding the door surface. The 3/4 inch (19 mm) width provides a solid bar feel, which can help with steady pulls on heavy fronts. The Blackrock collection design uses simple, hard geometric lines, so this pull brings a clean, modern look that works well across a run of matching hardware.
The 12 inch (305 mm) center-to-center measurement defines the drilling distance between the mounting points, guiding hole layout on appliance panels or large cabinet doors. A base length of 15/16 inch (24 mm) at each post sets the footprint against the surface, which helps you plan clearances near panel edges or neighboring hardware. The 3/4 inch (19 mm) base width matches the bar width, creating a consistent contact pad on the surface that supports stable mounting. With a projection of 1-11/16 inches (43 mm), you can allow for door swing near adjacent walls or cabinets while maintaining hand clearance. These dimensions combine to give a predictable fit on tall doors, appliance panels, or wide drawer fronts where alignment and spacing are critical.
This Amerock Blackrock appliance pull is part of the Blackrock collection, so its simple geometric styling lines up with other Blackrock pieces on the same installation. The black bronze finish works as a dark accent on many cabinet finishes, creating a defined pull line along tall doors and wide drawers. With a 12 inch (305 mm) center-to-center span, the pull suits appliance panels and oversized cabinet fronts that benefit from a longer handhold. The 13-5/16 inch (338 mm) overall size reads proportionally on large faces, avoiding the undersized look that smaller pulls can create on big fronts. The zinc die-cast material supports this larger format while keeping clean, sharp edges on the geometric design. These traits make the pull suitable anywhere a longer, linear handle is preferred across the cabinet run.
The defined 12 inch (305 mm) center-to-center dimension lets you repeat hole locations across multiple doors, supporting straight, level lines of pulls along a bank of cabinets. The matching 3/4 inch (19 mm) width at the bar and base keeps the visual line even from end to end, which helps align with other Blackrock pulls sized for doors and drawers. A base length of 15/16 inch (24 mm) at each mounting point creates a clear rectangle to reference during layout, aiding in squaring the pull to door edges. The 1-11/16 inch (43 mm) projection remains consistent along the bar, which keeps hands the same distance off the face for a uniform feel from door to door. The black bronze finish ties all these dimensional details together, giving a continuous appearance when multiple BP55280BBR pulls are used across the project.
The Amerock Blackrock appliance pull has a 12 inch (305 mm) center-to-center dimension, which sets the distance between mounting holes for consistent drilling on doors or appliance panels.
The Amerock BP55280BBR pull measures 13-5/16 inches (338 mm) overall, giving a proportionally long handle for larger doors and appliance fronts.
The Blackrock black bronze appliance pull projects 1-11/16 inches (43 mm) from the surface, providing finger clearance between the bar and the door face.
The Amerock Blackrock BP55280BBR appliance pull is made from zinc die-cast, which supports crisp geometric lines in the Blackrock collection design.
This Amerock Blackrock appliance pull uses a black bronze finish, giving a dark, refined appearance that coordinates with other Blackrock collection hardware.
Each base on the BP55280BBR pull is 15/16 inch (24 mm) long and 3/4 inch (19 mm) wide, defining the contact area on the door or panel surface.
The Amerock Blackrock appliance pull in black bronze combines a 12 inch (305 mm) center-to-center span with a 13-5/16 inch (338 mm) overall length, matching the scale of appliance panels and oversized doors. Its zinc die-cast construction and geometric Blackrock collection styling provide a straightforward, modern look that aligns with other Blackrock hardware. Use the defined projection, base size, and width to plan consistent mounting across your run, then choose this BP55280BBR model when you want a long, linear pull that visually fits larger cabinet and appliance fronts.
Sold In: 1 Each
