Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Blackrock appliance pull is a zinc die-cast appliance pull designed for projects that need an 18 inch (457 mm) center to center grip, so it suits larger panel-ready appliances or wide cabinet doors that match this drilling. The Oil-Rubbed Bronze finish gives the pull a dark, traditional tone, which works where a warm metal finish is part of the overall design. A total length of 19-3/8 inches (492 mm) means the handle extends beyond the mounting holes, providing a generous hand grip across the face of the door. A projection of 1-3/4 inches (44 mm) creates space between the hand and the surface, which matters when opening heavier doors. The Blackrock collection uses simple geometric lines, so the pull presents a clean, straight profile that pairs with modern or transitional door styles. The Amerock Corporation part number BP55281ORB identifies this exact size and finish.
The 18 inch (457 mm) center-to-center measurement defines the mounting pattern for this Amerock Blackrock appliance pull, so drilling can be laid out accurately across wide doors. A base length of 15/16 inch (24 mm) and base width of 3/4 inch (19 mm) indicate the footprint at each mounting post, which helps when planning rail widths and edge distances. The 1-3/4 inch (44 mm) projection sets the standoff from the door face, shaping how fingers wrap behind the pull during operation. The 3/4 inch (19 mm) bar width ties into these dimensions, giving a clear sense of how the pull will sit visually on appliance panels or tall pantry doors.
The 18 inch (457 mm) center-to-center layout makes the Blackrock BP55281ORB well suited to tall cabinet doors or appliance fronts that are designed around this wider spread, so it supports consistent alignment across a run of large panels. The total length of 19-3/8 inches (492 mm) lets the pull span a meaningful portion of the door, which helps visually balance taller fronts. With a base length of 15/16 inch (24 mm) and base width of 3/4 inch (19 mm), the posts sit comfortably on common cabinet rail sizes, which is useful when positioning the pull near door edges. The 3/4 inch (19 mm) bar width keeps the profile strong yet streamlined, so it works on both flat and framed door designs. The Oil-Rubbed Bronze finish ties this pull into projects that already feature bronze-toned hinges or fixtures, giving a single visual line from small doors to full-height appliance panels.
The 1-3/4 inch (44 mm) projection sets a consistent stand-off, so the hand clears the door surface in the same way across multiple doors built around this pull. That consistent projection helps when doors sit close to adjacent panels, because the grip depth stays predictable across the run. The zinc die-cast construction creates a uniform body, so each Blackrock pull shares the same profile and dimensions, which matters when lining up several pulls on tall cabinets or paired appliances. The Oil-Rubbed Bronze finish creates a single color tone, so alignment lines read clearly without reflective distraction. Using the Amerock part number BP55281ORB keeps the exact combination of 18 inch center-to-center, Blackrock design, and Oil-Rubbed Bronze finish consistent from one order to the next, supporting repeat projects or later additions that need to match the original installation.
The Amerock Blackrock appliance pull has an 18 inch (457 mm) center-to-center dimension, so the mounting holes must be drilled at that spacing for a proper fit.
The Amerock BP55281ORB appliance pull measures 19-3/8 inches (492 mm) in overall length, giving extended grip length on tall doors or appliance fronts.
The Blackrock appliance pull projects 1-3/4 inches (44 mm) from the mounting surface, providing finger clearance when pulling heavier doors or panels.
The Amerock Blackrock appliance pull is zinc die-cast, giving a formed metal construction that matches other zinc die-cast pieces in the collection.
The BP55281ORB appliance pull has an Oil-Rubbed Bronze finish, providing a dark bronze tone that coordinates with similar bronze hardware and fixtures.
Each base on this Amerock pull is 15/16 inch (24 mm) long and 3/4 inch (19 mm) wide, which helps plan its footprint on cabinet rails or panels.
The Amerock Blackrock appliance pull with 18 inch (457 mm) center-to-center spacing, Oil-Rubbed Bronze finish, and zinc die-cast construction aligns well with wide cabinet doors or appliance fronts using this pattern. The 19-3/8 inch (492 mm) overall length and 1-3/4 inch (44 mm) projection create a substantial, consistent grip across multiple panels. Matching dimensions such as the 3/4 inch (19 mm) bar width and defined base sizes help plan rail sizing and door layout around this specific pull. When a project calls for the Amerock BP55281ORB combination of size, finish, and Blackrock geometry, this pull delivers that exact specification for coordinated installations.
Sold In: 1 Each
