Amerock Blackrock Series Golden Champagne 18" (457 mm) Center to Center Appliance Pull, -BP55281BBZ

Amerock Blackrock Appliance Pull 18 Inch Use

Amerock Blackrock appliance pull 18 inch is a zinc appliance pull in the Blackrock collection with an 18 inch (457 mm) center-to-center mount, giving larger cabinet or appliance fronts a long, continuous grip span that feels substantial in daily use. The Golden Champagne finish on this Amerock Blackrock pull provides a warm metallic tone that visually softens hard geometric lines, which helps it sit cleanly on modern fronts without looking harsh. The pull length of 19-3/8 inches (492 mm) extends slightly beyond the mounting spread, so the hand lands fully on metal instead of near the mounting points. A projection of 1-3/4 inches (44 mm) creates stand-off from the door face, so fingers clear the surface more comfortably when opening heavier fronts.

Key Blackrock Golden Champagne Pull Details

• The Amerock Blackrock pull is made from zinc, giving the appliance pull a solid metal body that feels sturdy when gripping wider appliance-style doors or tall pantry fronts.
• The Golden Champagne finish on the Blackrock series pull establishes a consistent warm metallic look across hardware runs, which supports visual alignment when multiple pulls are mounted on the same elevation.
• The center-to-center dimension of 18 inches (457 mm) defines the mounting hole spacing, which matters when laying out drilling patterns on door or panel faces for this appliance pull.
• The overall length of 19-3/8 inches (492 mm) extends past the hole spread, which helps the pull visually anchor large fronts while keeping the grip area balanced between the two bases.
• A projection of 1-3/4 inches (44 mm) and width of 3/4 inch (19 mm) set the hand clearance and gripping surface, so fingers have defined depth and thickness to catch when pulling.
• Base dimensions of 15/16 inch (24 mm) length and 3/4 inch (19 mm) width give each foot a clear footprint, which helps the pull sit flat and distribute load at each mounting point.

Installation Dimensions For Amerock Appliance Pull

This Amerock Blackrock appliance pull uses an 18 inch (457 mm) center-to-center layout, so drilling operations focus on that fixed spread when preparing door or panel faces. The 19-3/8 inch (492 mm) overall length provides clear end-to-end size for setting reveals to adjacent hardware or door edges. With a projection of 1-3/4 inches (44 mm), installers know how far the pull stands proud of the surface, which matters around tight clearances or opposing doors. A 3/4 inch (19 mm) width and base footprint of 15/16 by 3/4 inch (24 by 19 mm) define the contact area, helping align the pull square to stile or panel edges during fastening.

Using The Amerock BP55281BBZ Pull In Projects

Where This Blackrock Appliance Pull Performs Best

The Amerock Blackrock series Golden Champagne appliance pull with 18 inch (457 mm) center-to-center spacing suits wide cabinet or appliance fronts where a longer grip is practical. The 19-3/8 inch (492 mm) overall length makes this pull proportionally appropriate on tall pantry doors or large integrated fronts, helping it read as a substantial handle rather than a small cabinet pull. Its 3/4 inch (19 mm) width and solid zinc construction create a defined bar that feels steady when opening heavier doors. The Golden Champagne finish ties into projects using warm metallic tones, so this pull can run across banks of doors while keeping a consistent look. Because the pull belongs to the Blackrock collection, its geometric styling aligns with other Blackrock pieces, which supports coordinated layouts across different cabinet sizes.

Details That Support Repeatable Fit And Layout

The fixed 18 inch (457 mm) center-to-center dimension on the Amerock BP55281BBZ appliance pull gives installers a clear reference for boring patterns, which helps repeat consistent hole placement across multiple fronts. Knowing the projection is 1-3/4 inches (44 mm) allows planning for hand clearance near wall cabinets or adjacent panels, reducing interference when doors swing. The base length of 15/16 inch (24 mm) and base width of 3/4 inch (19 mm) define the footprint at each mounting point, so the pull can be aligned reliably to door rails or stiles. A 3/4 inch (19 mm) bar width provides a repeatable grip thickness from project to project, giving users a familiar feel when hardware is duplicated across a kitchen or built-in run. The zinc material keeps all these dimensions in a rigid metal body, supporting alignment that stays consistent once fastened.

Common Amerock Blackrock Pull Buyer Questions

Choose This Pull For Defined Appliance Grip

The Amerock Blackrock series Golden Champagne appliance pull with 18 inch (457 mm) center-to-center spacing, 19-3/8 inch (492 mm) overall length, and 1-3/4 inch (44 mm) projection delivers a long, consistent grip bar sized for larger fronts. The zinc construction, 3/4 inch (19 mm) width, and defined base dimensions support stable mounting and a familiar hand feel across multiple doors. Select this Amerock BP55281BBZ pull when those verified dimensions, Golden Champagne finish, and Blackrock collection styling match the layout requirements of your cabinet or appliance fronts.