Amerock Blackrock Series Polished Nickel 12" (305 mm) Center to Center Appliance Pull, -BP55280PN

Amerock Blackrock Appliance Pull For Large Doors

Amerock Blackrock appliance pull gives you a 12 inch (305 mm) center-to-center grip, so it spans wider appliance and cabinet fronts with a balanced, purposeful look. The pull is part of the Blackrock collection, which is inspired by hard geometric lines, so its simple shapes read clean and modern on face frames or full-overlay panels. A total length of 13-5/16 inches (338 mm) stretches the hardware slightly beyond the drill centers, which visually anchors tall panels. The 3/4 inch (19 mm) width provides a solid bar profile, helping fingers catch the pull comfortably along its face. A projection of 1-11/16 inches (43 mm) holds the hand out from the door surface, which supports a firm, knuckle-clear grip when operating heavier appliance fronts.

Key Blackrock Pull Details That Support The Job

• The 12 inch (305 mm) center-to-center dimension lines up with common appliance and tall door drilling layouts, which helps keep hole spacing consistent across multiple fronts in a run.
• The 13-5/16 inch (338 mm) overall length leaves a small margin past the mounting holes, which visually finishes the ends of the pull on wider doors without looking oversized.
• The polished nickel finish presents a bright, reflective surface, which ties in with stainless or nickel-toned fixtures and keeps the hardware appearance uniform across a kitchen.
• The zinc material keeps the pull in a metal construction, which gives it a solid feel in hand for repeated door or drawer operation.
• The 3/4 inch (19 mm) width and 15/16 inch (24 mm) by 3/4 inch (19 mm) base footprint create a stable contact area, which helps spread load where the pull meets the door face.

Mounting Dimensions For Accurate Blackrock Placement

This Amerock Blackrock appliance pull uses a 12 inch (305 mm) center-to-center mount, so drilling can be laid out with a straight 12 inch spread between holes for each handle. The base length of 15/16 inch (24 mm) and base width of 3/4 inch (19 mm) define the footprint that will sit on the door surface, which helps with setting backset from door edges or aligning with stile widths. A projection of 1-11/16 inches (43 mm) sets the stand-off from the face, which is useful when planning clearance around adjacent doors, trim pieces, or nearby walls.

Using The BP55280PN Pull In Real Installations

Where The Amerock Blackrock Appliance Pull Fits Best

The Amerock Blackrock appliance pull in polished nickel works as a long pull on appliance fronts and larger cabinet doors where a 12 inch (305 mm) center-to-center pattern is desired. Its 13-5/16 inch (338 mm) overall length suits tall pantry faces or panel-ready appliances that benefit from a continuous gripping area. The 3/4 inch (19 mm) bar width keeps the profile substantial enough for full-hand contact on heavy fronts. With a base size of 15/16 inch (24 mm) by 3/4 inch (19 mm), the pull seats neatly on typical cabinet rail or stile dimensions. The polished nickel finish coordinates visually with other polished nickel decorative hardware, so it can be used as a statement piece while still matching smaller pulls from the same space.

Details That Support Consistent Alignment And Workflow

The 12 inch (305 mm) center-to-center measurement on the BP55280PN appliance pull simplifies layout because the same spacing can be repeated across multiple doors or panels along a run. This regular spacing supports straight visual lines when several pulls are mounted at the same height. The 1-11/16 inch (43 mm) projection holds the gripping surface off the door face, which can help hands clear raised panel profiles or adjacent trim components. A base footprint of 15/16 inch (24 mm) by 3/4 inch (19 mm) gives a clear rectangle to reference against door edges or scribe lines during marking. The zinc construction keeps the pull in a consistent metal body, which supports a uniform look and feel with other zinc-based decorative hardware in the project.

Common Amerock Blackrock Appliance Pull Questions

Select The Right Blackrock Pull For Your Project

The Amerock Blackrock appliance pull BP55280PN combines a 12 inch (305 mm) center-to-center layout with a 13-5/16 inch (338 mm) overall length, so it suits tall doors and appliance panels that need a substantial handle. With a polished nickel finish and zinc construction, it coordinates with other metal hardware while maintaining a consistent feel. The defined base dimensions and 1-11/16 inch (43 mm) projection give clear numbers for planning hole locations and clearances. For projects calling for a long, polished nickel pull with these specific measurements, this Blackrock model offers a straightforward match.