Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Blackrock 18 inch appliance pull is a zinc die-cast handle in the Blackrock collection that provides a consistent grip point across larger panels. The 18 inch (457 mm) center-to-center mounting size spans wider appliance or tall cabinet fronts, which helps distribute pulling force along the surface. The overall length of 19-3/8 inches (492 mm) adds extra hand space beyond the mounting holes, useful when accessing heavier doors. A projection of 1-3/4 inches (44 mm) holds the pull off the face, creating clearance for fingers during daily operation. The 3/4 inch (19 mm) width gives a substantial bar thickness, supporting a firm grasp during repeated use. Matching base dimensions, with a base length of 15/16 inch (24 mm) and base width of 3/4 inch (19 mm), create stable contact points against the mounting surface.
The Amerock BP55281G10 appliance pull uses an 18 inch (457 mm) center-to-center dimension, which fits installations planned around that standard spacing on appliance panels or tall doors. The base length of 15/16 inch (24 mm) and base width of 3/4 inch (19 mm) define the footprint at each mounting point, which helps plan clearance from door edges or trim details. A projection of 1-3/4 inches (44 mm) sets the stand-off distance from the surface, which provides space for fingers between the bar and panel. The 3/4 inch (19 mm) width of the bar keeps the grip surface consistent from end to end, which supports steady hand placement in vertically or horizontally oriented installs.
This Blackrock series satin nickel pull belongs to the appliance pulls product class, which makes it suitable for applications needing a longer handle span across a door face. The 18 inch (457 mm) center-to-center mounting works well on wider fronts where shorter cabinet pulls would leave concentrated stress at a smaller area. Its overall 19-3/8 inch (492 mm) length visually anchors taller or broader surfaces, which helps maintain proportion across a bank of large panels. The 3/4 inch (19 mm) width pairs with the hard geometric profile, which gives a defined linear look that complements modern, square-edged door and drawer styles. With a satin nickel finish, the pull coordinates with other satin nickel decorative hardware, which supports a unified appearance from appliance fronts to surrounding cabinetry.
The consistent 18 inch (457 mm) center-to-center measurement on this Amerock Blackrock 18 inch appliance pull simplifies layout when multiple doors need matching handle spacing, which helps keep lines straight across a run. The base length of 15/16 inch (24 mm) and base width of 3/4 inch (19 mm) give predictable end-cap sizing, which aids in positioning the pull at a uniform distance from door edges for a symmetrical installation. A projection of 1-3/4 inches (44 mm) fixes the bar at a known stand-off, which keeps finger clearance uniform from one front to the next. The zinc die-cast construction keeps the geometry stable along the entire pull, which supports accurate alignment of both mounting points without twist. Combined with the satin nickel finish, these dimensions create repeatable visual and functional results across multiple units on the same project.
The Amerock Blackrock 18 inch appliance pull has an 18 inch (457 mm) center-to-center dimension, which aligns with drilling set for that spread on appliance panels or tall cabinet doors.
The Amerock BP55281G10 measures 19-3/8 inches (492 mm) overall, which extends slightly beyond the 18 inch mounting points to provide extra gripping area at each end.
The Blackrock series satin nickel pull is zinc die-cast, which forms a solid handle body with consistent geometry along its length for predictable hand feel and alignment.
This satin nickel appliance pull projects 1-3/4 inches (44 mm) from the mounting surface, which creates usable space for fingers behind the bar on thicker panels.
The bar on this 18 inch cabinet appliance handle is 3/4 inch (19 mm) wide, which offers a substantial gripping surface for opening heavier doors or large fronts.
This Amerock Blackrock cabinet pull uses a satin nickel finish, which offers a soft metallic look that coordinates with many brushed nickel hinges and fixtures.
The Amerock Blackrock 18 inch appliance pull in satin nickel pairs an 18 inch (457 mm) center-to-center span with a 19-3/8 inch (492 mm) overall length, supporting larger doors or panels that benefit from a long handle. Its zinc die-cast construction, 3/4 inch (19 mm) width, and 1-3/4 inch (44 mm) projection create a consistent gripping surface suited to frequent use. For projects calling for a Blackrock collection look with defined lines across wider fronts, this BP55281G10 model offers the key dimensions and finish needed to match an 18 inch layout.
Sold In: 1 Each
