Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Blackrock appliance pull in satin nickel gives an appliance door or large cabinet a straight, geometric handle that matches modern hardware runs. The 8 inch (203 mm) center to center mounting dimension sets the pull up for wider appliance or pantry panels where a longer grip helps opening feel controlled. The 9-3/8 inch (238 mm) overall length extends beyond the mounting points, so the handle visually anchors tall fronts. A 1-11/16 inch (43 mm) projection stands the grip off the face enough for confident fingers-behind clearance on thicker doors. The 3/4 inch (19 mm) width and 15/16 inch (24 mm) base length create a solid bar look that reads substantial on full-height fronts. Zinc die-cast construction provides a rigid pull body, and the satin nickel finish coordinates with common appliance trims and door hardware in the same tone for a consistent installation line.
The 8 inch (203 mm) center to center measurement defines the drilling pattern, so holes can be laid out precisely before boring appliance panels or tall cabinet fronts. The 15/16 inch (24 mm) base length and 3/4 inch (19 mm) base width set the footprint where the pull meets the surface, which helps with alignment to rail widths or stile faces. A 1-11/16 inch (43 mm) projection off the face means door swing clearances and adjacent fronts can be planned around the pull depth. With the 9-3/8 inch (238 mm) overall length known, installers can center the handle on wider doors or align it with nearby hardware lines for a consistent visual grid.
This Amerock Blackrock satin nickel 8 inch center to center appliance pull suits tall cabinet doors and appliance panels that call for a longer handle. The 9-3/8 inch (238 mm) overall length lays out well on full-height pantry doors, as the bar spans more of the stile for a balanced look. On paneled appliances, the 8 inch (203 mm) center to center size aligns with many appliance-handle drilling standards, so the pull can visually coordinate with other satin nickel elements in the same space. The 3/4 inch (19 mm) width and 3/4 inch (19 mm) base width keep the handle visually slim while still reading as an appliance-scale pull, which works on both narrow and wide fronts. The satin nickel finish brings a muted metallic surface that pairs with satin nickel decorative hardware for a unified run across appliances and cabinetry.
The defined 8 inch (203 mm) center to center spacing lets installers template hole locations, which is useful when repeating this Amerock BP55279G10 pull across multiple tall doors or several appliances. The 1-11/16 inch (43 mm) projection supports consistent finger clearance, so every door equipped with this pull offers the same grip feel from one cabinet line to the next. The 15/16 inch (24 mm) base length provides a stable contact area on the door face, helping the pull sit flush when the surface is prepared to match that footprint. Zinc die-cast construction gives the Blackrock appliance pull a solid, unified body; that supports clean edges along the simple geometric design so visual lines stay straight across aligned hardware. The satin nickel finish keeps the appearance tied to other satin nickel Amerock Blackrock cabinet hardware, so matching pulls and handles can share the same dimensions and finish language around the room.
The Amerock Blackrock appliance pull has an 8 inch (203 mm) center to center dimension, which sets the drilling distance between mounting holes for accurate appliance or tall cabinet layouts.
The Amerock BP55279G10 pull is 9-3/8 inches (238 mm) overall, so it extends past the mounting points to give a longer gripping area on tall doors and appliance panels.
This satin nickel appliance pull projects 1-11/16 inches (43 mm) from the door surface, providing space behind the bar for a comfortable hand grip on thicker doors.
The Amerock Blackrock appliance pull is made from zinc die-cast, giving the handle a solid, formed body that supports the straight geometric design.
The Blackrock appliance pull has a 3/4 inch (19 mm) width and a 3/4 inch (19 mm) base width, creating a slim bar look that still reads as appliance-scale hardware.
The Amerock Blackrock 8 inch center to center pull uses a satin nickel finish, aligning it with satin nickel decorative hardware used on nearby cabinets and doors.
The Amerock Blackrock satin nickel 8 inch (203 mm) center to center appliance pull pairs defined dimensions with a clean bar profile, which helps plan drilling and hardware alignment on tall fronts. With a 9-3/8 inch (238 mm) overall length, 1-11/16 inch (43 mm) projection, and 3/4 inch (19 mm) width, this zinc die-cast pull gives a consistent grip feel and visual line across doors or appliance panels. For projects calling for satin nickel Amerock Blackrock cabinet hardware, this appliance pull extends that same look onto larger fronts using the Amerock BP55279G10 specification.
Sold In: 1 Each
