
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Kane Series pull gives cabinets a classic, understated look by pairing timeless styling with a simple handle profile, which suits both straightforward replacements and new installations in kitchens, baths, or shop-built projects. The weathered nickel finish provides a muted metallic tone that softens reflections, which helps this pull blend with a range of hinges and fixtures without demanding exact finish matches. Its zinc die-cast construction creates a solid-feeling handle, which supports confident use on doors and drawers that see frequent opening and closing. A center-to-center dimension of 5-1/16 inches, or 128 mm, sets the mounting hole spacing, which matters when lining up multiple pulls across drawer banks or aligning with existing drilled fronts. An overall length of 5-11/16 inches leaves a visual reveal beyond the screw holes, which gives doors and drawers a balanced appearance once mounted.
The Amerock Kane Series pull uses a 5-1/16 inch (128 mm) center-to-center dimension, which is a common spacing that aligns with many pre-bored cabinet and drawer fronts. That spacing helps streamline layout on face frames or frameless fronts when running a series of pulls in a straight line. A projection of 1-3/16 inches, or 30 mm, sets how far the pull stands off the surface, which influences both finger clearance and how far the hardware extends into walk paths. The 5-11/16 inch overall length supplies additional material past the mounting holes, which visually anchors the pull on wider drawer faces. A base diameter of 5/8 inch, or 16 mm, defines the contact circle at each end, which can cover small defects around drill points on refacing or retrofit jobs.
The Amerock Kane Series pull with 5-1/16 inch (128 mm) center-to-center spacing fits applications where consistent hole locations are needed across banks of drawers or rows of doors, such as kitchen runs or shop-built casework. Its length of 5-11/16 inches works well on medium-width drawers and doors, where a longer pull would dominate the front and a smaller knob would feel undersized. The weathered nickel finish suits projects calling for a softer metallic tone rather than a bright, polished look, which can align with existing weathered nickel decorative hardware in the same room. The zinc die-cast material supports use on frequently operated cabinet doors and drawers, so it suits everyday residential cabinetry or light commercial millwork that needs a consistent hardware line.
The 128 mm center-to-center measurement on this Kane pull provides a precise dimension for drilling jigs or templates, which makes it easier to repeat hole locations from cabinet to cabinet without recalculating spacing. A projection of 1-3/16 inches, or 30 mm, defines how far the grip stands off the face, which can help avoid knuckles brushing the door surface during use. The 11/16 inch width (17 mm) sets the narrowest part of the handle, which guides how closely pulls can be placed near door edges or neighboring hardware while remaining comfortable to grasp. A base diameter of 5/8 inch, or 16 mm, creates a defined bearing surface at each mounting point, which can visually square the pull ends against layout lines drawn on the cabinet face. The Amerock BP53802WN designation identifies this exact combination of Kane design, weathered nickel finish, and 128 mm center-to-center size, which matters when matching existing pulls in a space or specifying a consistent model across multiple rooms.
The Amerock Kane Series pull has 5-1/16 inch, or 128 mm, center-to-center mounting, which sets the exact drill hole spacing for aligning multiple handles on doors and drawers.
The Amerock BP53802WN Kane pull measures 5-11/16 inches, or 144 mm, overall length, which helps it visually fit medium-width cabinet doors and standard drawer fronts.
The Kane pull projects 1-3/16 inches, or 30 mm, from the cabinet surface, which sets finger clearance and how far the hardware extends into the room.
The Amerock Kane Series pull is made from zinc die-cast material, which provides a solid-feeling grip for regular use on cabinet doors and drawers.
The BP53802WN Kane pull has a weathered nickel finish, which delivers a muted metallic appearance that coordinates with other weathered nickel decorative hardware.
The 11/16 inch, or 17 mm, width defines the grip thickness on the Kane pull, which affects how it feels in hand during repeated cabinet operation.
The Amerock Kane Series 5-1/16 inch (128 mm) center-to-center weathered nickel pull provides a defined spacing, projection, and footprint that support clean layouts on cabinet doors and drawers. Its zinc die-cast construction and 5-11/16 inch length suit everyday use on medium-width fronts in kitchens, baths, or shop-built casework. The BP53802WN part number ties together the Kane design, 128 mm center-to-center size, and weathered nickel finish, which supports consistent selection when matching pulls across multiple cabinets or future projects.
Sold In: 1 Each