
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Amerock Kane weathered nickel pull is a zinc die-cast cabinet handle designed to give cabinets and drawers a classic, understated look that works well on many projects. The Kane collection is described as pairing timeless beauty with utilitarian design, so this pull brings visual interest without dominating the front of the door or drawer. Its 6-5/16 inch, or 160 mm, center-to-center dimension sets consistent spacing for two mounting points, which helps with straight-line layouts across multiple fronts. The overall 7 inch, or 178 mm, length provides hand clearance across the grip area, which supports comfortable use on wider fronts. A projection of 1-1/4 inch, or 32 mm, sets the pull out from the surface, creating room for fingers to wrap behind the bar during daily operation.
The 6-5/16 inch (160 mm) center-to-center measurement on the Kane pull establishes the exact distance between mounting holes, which is critical when laying out drilling jigs or matching existing bore patterns on replacements. With a 7 inch overall length, there is a visible margin of metal extending past each screw location, which helps the pull visually anchor onto the stile or rail. The 1-1/4 inch projection defines how far the handle stands off the door or drawer face, which affects knuckle clearance during everyday use. A width of 11/16 inch, or 17 mm, balances the front view so the pull reads as substantial without overpowering narrow rails. The 5/8 inch, or 16 mm, base diameter where the feet meet the surface helps distribute contact on the cabinet face.
The Amerock Kane Series BP53803WN pull is a handle from the Kane collection designed for cabinet doors and drawers where a classic, understated appearance is desired. Its weathered nickel finish supports installations aiming for a softer metal tone on face frames or frameless cabinet fronts. The 6-5/16 inch (160 mm) center-to-center spread suits medium-width and larger fronts, so it works well on many base cabinet drawers, wider wall doors, and pantry panels that can visually support a 7 inch long pull. Because the pull uses a zinc die-cast construction, it provides a uniform look across multiple pieces in a run, which is important when lining up several handles on banks of drawers or tall units. The combination of length, projection, and width lets this pull serve on both kitchen and shop storage cabinetry where consistent grip spacing matters.
The defined 160 mm center-to-center dimension on this Kane pull gives installers a single drilling reference, which streamlines jig setup and reduces layout variation from cabinet to cabinet. The 7 inch length provides additional leverage along the handle, which helps users comfortably open heavier drawers that carry tools, cookware, or supplies. With a 1-1/4 inch projection, the pull offers a clear gap between the door or drawer face and the gripping surface, which benefits users with larger hands during repeated use throughout the day. The 11/16 inch width keeps the handle slim across its front, which helps maintain precise visual alignment when several pulls are installed in a grid or stacked on tall cabinet banks. The 5/8 inch base diameter at each mounting point creates a defined footprint on the cabinet surface, which visually finishes the installation at both ends of the pull.
The BP53803WN pull has a 6-5/16 inch (160 mm) center-to-center, 7 inch (178 mm) overall length, 1-1/4 inch (32 mm) projection, 11/16 inch (17 mm) width, and 5/8 inch (16 mm) base diameter, which guides layout and fit.
The 160 mm center-to-center measurement gives a fixed distance between mounting points, which supports consistent drilling patterns and easier jig setup across multiple doors and drawers.
The Amerock Kane BP53803WN pull is made from zinc die-cast material, which provides a solid metal body and consistent appearance across all pulls in the same installation.
The weathered nickel finish gives the pull a softened metallic look, which works well on cabinets where a classic, less reflective hardware tone is desired.
The 1-1/4 inch (32 mm) projection sets the pull away from the cabinet face, which creates finger clearance behind the handle during repeated opening and closing.
The Amerock Kane BP53803WN pull, with its 7 inch overall length and 160 mm center-to-center spread, suits many wider drawers where a longer gripping surface is beneficial.
The Amerock Kane Series BP53803WN pull combines a 6-5/16 inch (160 mm) center-to-center layout, 7 inch length, and 1-1/4 inch projection to support repeatable cabinet installations. At Wurth Baer Supply, this weathered nickel, zinc die-cast handle serves projects targeting a classic, understated look with consistent mounting dimensions.
Sold In: 1 Each