Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kane appliance pull gives an 8 inch (203 mm) center-to-center mounting layout that spans appliance panels cleanly, so doors and drawers open with a solid, balanced grip across wider fronts. The 8-7/8 inch (225 mm) overall length creates a substantial handhold, which helps on tall panels or heavier doors where leverage matters. A 1-5/8 inch (41 mm) projection holds the grip away from the surface, giving room for fingers and work gloves while keeping hardware from snagging against adjacent fronts. The 7/8 inch (22 mm) width and matching 7/8 inch base diameter spread contact on the panel, which supports stable mounting on appliance-grade fronts. The weathered nickel finish provides a muted metallic look, fitting projects that call for understated hardware instead of high-gloss metal. The pull is built from zinc die-cast material, giving a solid-feeling part that suits everyday cabinet and appliance use.
This Amerock Kane Series pull is specified as an appliance pull with an 8 inch (203 mm) center-to-center dimension, so hole boring can follow a simple two-point layout on appliance panels and large doors. The 7/8 inch (22 mm) base diameter at each end concentrates the contact area around the fastener locations, helping the pull seat firmly against the panel surface. A 1-5/8 inch (41 mm) projection defines the stand-off distance, which affects both user hand clearance and how far the hardware extends into walk paths. With an 8-7/8 inch (225 mm) overall length, the pull spans wide stiles or panel rails, allowing installers to align it visually with other long handles in the space. The zinc die-cast material supports clean edge transitions around the mounting bases, which can help the pull sit flush against flat appliance or cabinet faces.
The Amerock Corporation Kane Series appliance pull is classified under Decorative Hardware & Moldings in Handles and Pulls, so it is suited to visible cabinet and appliance fronts where appearance matters along with function. As an appliance pull within the Kane collection, it works on installations that call for a larger handle size on built-in appliance panels or oversized cabinet doors. The 8 inch (203 mm) center-to-center spec lines up with layouts that rely on common appliance pull drilling patterns, helping maintain a consistent grid when pairing this part with other Kane collection pieces. Its weathered nickel finish suits projects that use warm or transitional metal tones, making the pull a fit for kitchens, baths, or utility areas that need hardware with a classic rather than high-polish look.
The 8-7/8 inch (225 mm) length gives clear visual endpoints, which helps when aligning multiple pulls at the same height across a run of tall doors or appliance panels. With a 1-5/8 inch (41 mm) projection, installers can account for door swing and adjacent fronts, reducing interference when panels open past nearby cabinetry. The 7/8 inch (22 mm) width combined with the 7/8 inch base diameter provides predictable bearing areas at each mounting point, supporting firm attachment on thicker fronts often used for appliance integration. Zinc die-cast construction allows the pull to maintain its shape under torque from daily use, which is important on panels that see repeated opening cycles. Because the pull sits within the Kane collection family, its dimensions and finish can help coordinate across a job where matching handles and pulls are specified.
The Amerock Kane appliance pull uses an 8 inch (203 mm) center-to-center measurement, which sets a straightforward drilling pattern for appliance panels and wider cabinet doors.
The BP53804WN Kane pull has an overall length of 8-7/8 inch (225 mm), providing a long gripping area that suits tall doors and appliance fronts.
The Amerock Kane appliance pull has a 1-5/8 inch (41 mm) projection, giving finger clearance between the handle and door surface during operation.
The Kane Series appliance pull is made from zinc die-cast, providing a solid, rigid pull body for regular cabinet and appliance use.
This Kane cabinet appliance handle has a weathered nickel finish, giving a subdued metal appearance suited to classic and understated designs.
The Amerock Kane BP53804WN pull has a 7/8 inch (22 mm) width and base diameter, creating a defined bearing surface where it meets the door or panel.
The Amerock Kane Series weathered nickel 8 inch (203 mm) center-to-center appliance pull BP53804WN combines zinc die-cast construction, an 8-7/8 inch (225 mm) overall length, 1-5/8 inch (41 mm) projection, and 7/8 inch (22 mm) base diameter to support appliance-front and large-door installations. For projects that call for a classic, understated metal finish and a substantial handle size from the Kane collection, this pull provides the core dimensions and appearance needed for coordinated cabinetry and appliance panels.
Sold In: 1 Each
