PRO Value Open Oval Flange, 3 Holes, No Pins, Dull Brass

Screw-On Rod Support For Oval Closet Rods

Screw-On Rod Support from the Pro Value Series is an oval closet rod flange designed to carry an oval rod in a typical shelf, closet, or garage organization layout. The flange is made of a zinc alloy, so the body provides a rigid, stable seat for the rod in everyday use. The dull brass finish gives the rod support a muted brass look, which helps it blend into closets or built-ins that use similar hardware tones. Each flange has three screw holes, so the load spreads across more fasteners for a more secure mount when the rod is loaded. The screw pattern is sized for #6 x 3/4" screws, which ties directly into common woodworking hardware and simplifies planning hole locations in the supporting panel or cleat.

Key Rod Flange Details That Support Workflow

• Flanges are made of a zinc alloy, providing a solid metal body that supports an oval closet rod in typical storage applications and resists deformation in normal service.
• The flanges have a dull brass finish, giving them a low-glare brass appearance that coordinates with other dull brass components in closet, shelf, or garage builds.
• Each flange has 3 screw holes, so you can fasten it with three points of contact and distribute the load along the mounting surface for better holding strength.
• The flange is designed for #6 x 3/4" screws, which aligns with common cabinet and closet fasteners and helps match drilling and pilot-hole setups during installation.
• The Pro Value Series designation ties this rod support to a consistent product family, helping keep hardware choices uniform across multiple closets or sections of the same job.

Mounting And Fastening Details For Installers

This closet rod flange uses a screw-on mounting method with three screw holes, so the flange seats directly to the supporting panel, wall cleat, or cabinet side. Because it is designed for #6 x 3/4" screws, the screw size is already defined, which simplifies choosing drill bits and spacing when laying out the holes. The oval shape of the flange is matched to an oval closet rod profile, so the rod nests into the support instead of relying on a flat surface, helping keep the rod aligned along the run. With a zinc alloy construction, the mounting area has a firm edge against the panel, which supports consistent positioning when multiple supports are installed along a longer closet rod.

How This Oval Closet Rod Flange Works In Practice

Using The Screw-On Rod Support In Closets

This screw-on oval rod support is part of the Shelf, Closet & Garage Organization category, so it is intended for typical storage layouts using closet rods and related hardware. The oval flange profile matches oval closet tubing, so the rod seats into a shaped pocket that helps control side-to-side movement along the support point. The dull brass finish makes it suited to projects that already use brass-toned hinges, pulls, or other rod components, keeping the look consistent inside the closet or cabinet. Because the flange is from the Closet Rods & Flanges product class, it fits naturally into standard rod-and-support layouts found in many residential or light commercial closets.

Details That Help With Alignment And Repeat Jobs

The three-hole screw pattern on this zinc alloy flange gives you a fixed triangle of fastener locations, which helps repeat the same layout across multiple panels or closet sections. Using the specified #6 x 3/4" screws means the fasteners engage a predictable depth in typical cabinet stock, supporting consistent pull-out resistance along a row of supports. The zinc alloy body provides a firm reference face for the rod, so once the flange is positioned, the mating oval rod will follow that alignment along its run. The dull brass finish on the Pro Value Series flange keeps the appearance uniform when the same part number, 54113 47 054, is used across a full project, which simplifies ordering and reordering when expanding or matching existing installations.

Common Questions About This Pro Value Rod Support

Selecting This Flange For Closet Rod Runs

This Pro Value Series Screw-On Rod Support combines a zinc alloy body, an oval flange profile, and a dull brass finish to support oval closet rods in storage layouts. The three-hole screw pattern and #6 x 3/4" screw design detail streamline layout for closet, shelf, and garage organization projects. When a job calls for a consistent dull brass look and a defined fastener pattern for oval rod supports, this closet rod flange provides that defined combination under part number 54113 47 054.