
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Screw-On Rod Support gives an installer a zinc alloy flange in a chrome finish that supports an oval closet rod where it meets the cabinet or wall, so the rod has a defined, stable bearing point at each end. Because the flange is part of the Pro Value Series, it aligns with common closet and storage layouts in shops that already use this line, helping keep parts consistent across jobs. The oval profile follows typical oval closet tubing geometry, so the rod nests into the support and resists twisting under normal hanging loads. The zinc alloy body provides a rigid mounting point, so the load transfers into the substrate rather than stressing the tubing connection itself. The bright chrome finish presents a clean, uniform look inside open closets or behind doors, supporting projects where appearance at hardware touchpoints matters.
The screw-on design of this closet rod flange means the zinc alloy body fastens directly to the cabinet side or wall through three screw holes, giving the rod a fixed, repeatable stop point. With three mounting holes rather than two, the fasteners can be arranged to distribute pull-out and shear loads over more material, which matters on particleboard or MDF closet panels. The absence of pins means the interior of the oval opening remains unobstructed, so the rod seats fully along the flange contact area instead of riding on a projection. Using #6 x 3/4 inch screws matches the stated hole sizing, so the screw shanks fit the flange holes and bite into typical cabinet materials without projecting excessively through the back.
This Screw-On Rod Support works as the termination point for oval closet rods in shelf, closet, and garage organization projects, so rods can be anchored between cabinet sides or between a side panel and a wall. Because the flange belongs to the Closet Rods & Flanges product class, it fits naturally into jobs that already use matching tubing and related parts from that group. In closet interiors, the chrome finish pairs with chrome rods and other bright hardware, which keeps the overall appearance consistent when doors are open. For garage or utility storage, the zinc alloy body gives a firm seat for the tubing, supporting normal hanging of garments or light storage without the rod shifting at its ends. The Pro Value Series branding ties this part to an established hardware line, helping shops standardize SKUs when repeating similar closet layouts across multiple units or projects.
The oval shape of this closet rod flange holds the matching oval tubing in a defined orientation, which keeps the flat faces of the rod aligned and helps hanger hooks track consistently along the run. With three screw holes available, the installer can stagger fasteners vertically or horizontally to suit the panel geometry, which helps maintain bite in the substrate even when working near other drill points. The zinc alloy material keeps the flange rigid at the mounting face, so the oval opening does not spread under load and the rod contact remains uniform. The chrome finish provides a smooth interface where the rod end meets the flange, aiding sliding of hangers across the joint between the supported span and the termination point. Identifying the part by manufacturer number 54113 46 013 helps shops reorder the same flange style, which supports consistent alignment and visual results across repeated closet or cabinet runs.
The Screw-On Rod Support is described as an oval closet rod flange, so it is intended to support oval closet tubing where the rod meets a panel or wall.
The flange has three screw holes, so the load from the rod can be spread over more fasteners, which helps distribute forces into the mounting surface during use.
The web description references #6 x 3/4 inch screws, so the flange holes are sized for that screw gauge and length in typical cabinet materials.
The flange is made of zinc alloy, which provides a rigid metal body so the oval opening holds its shape and supports the closet rod under hanging loads.
The Screw-On Rod Support has a chrome finish, so the visible hardware at the rod ends presents a bright, uniform look with chrome closet tubing.
The product is identified as Pro Value Series Screw-On Rod Support with manufacturer part number 54113 46 013, so shops can repeat the same flange in future jobs.
The Screw-On Rod Support from the Pro Value Series gives you a zinc alloy, chrome-finished oval flange that seats an oval closet rod securely against a cabinet side or wall. With three mounting holes and a screw-on design sized for #6 x 3/4 inch screws, it spreads load into the panel and keeps the rod in a repeatable position. When a project calls for an oval closet rod flange that aligns with Closet Rods & Flanges components and carries the 54113 46 013 identifier, this part provides that specific combination of shape, material, and finish for your next closet or storage run.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UF54113-48-091 Mfr# 54113 48 091 | Screw-On Rod Support, Dull Chrome Finish | ||||
Sold in: 1 Each | UF54113-47-054 Mfr# 54113 47 054 | Screw-On Rod Support, Dull Brass Finish | ||||
Sold in: 1 Each | UF54113-49-084 Mfr# 54113 49 084 | Screw-On Rod Support, Dull Nickel Finish | ||||
Sold in: 1 Each | UF54113-51-055 Mfr# 54113 51 055 | Screw-On Rod Support, Matte Black Finish | ||||
Sold in: 1 Each | UF54113-53-085 Mfr# 54113 53 085 | Screw-On Rod Support, Oil-Rubbed Bronze Finish |