
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Screw-On Rod Support Matte Black gives you an oval closet rod flange in a finish that matches matte black projects, so closet tubing sets into a consistent look across the run. This Pro Value Series part is built as a dedicated rod support, so it stays focused on holding closet tubing in place rather than carrying extra adjustment features. The flange is made of a zinc alloy, which provides a rigid bearing surface around the rod, helping the tube sit solidly at the side panel or wall. The oval flange layout supports typical oval closet tubing, so rods seat in a stable profile along the length. This screw-on style relies on #6 x 3/4" screws, so the support pulls tight to wood panels and closet side walls in a straightforward fastening pattern.
This oval closet rod flange uses a screw-on mounting pattern, so it fastens directly through the 3 screw holes into the substrate. The callout for #6 x 3/4" screws defines the intended shank size and depth of bite, which guides screw selection for wood-based closet panels. Because the flange has no pins, all positioning is handled by the screw hole pattern, which keeps the body flat to the mounting surface as the screws draw it tight. The zinc alloy body supports the screw heads around each hole, so the fasteners clamp the flange securely against closet sides or partitions once driven.
This Pro Value Series screw-on rod support is built for closet tubing and flanges work, so it suits shelf, closet, and garage organization layouts that rely on oval closet rods. The oval shape lines up with oval rod profiles, so it serves at rod ends where the tube meets a side panel, partition, or wall. The matte black finish ties into matte black closet rods or other dark organizational hardware, so the visible flange edge can sit near shelving fronts without drawing attention away from the run. In a closet rods and flanges setup, this part handles the rod support role at each end or intermediate point, so hanging space stays supported along walls or cabinet interiors.
The flange belongs to the Closet Rods & Flanges product class, so it is intended as a structural mounting point for closet tubing rather than decorative trim. Being part of a Shelf, Closet & Garage Organization category, it slots into broader storage assemblies that combine shelving with hanging space, so installers can coordinate rod placement with shelf heights. The Pro Value Series branding places this support within a consistent line of hardware, so jobs that already use that series can carry the same look and component family throughout a project.
The zinc alloy construction of the flange gives each mounting point a hard, dimensionally stable base, so repeated loading at the rod does not rely solely on the substrate for shape. With 3 screw holes, each attachment point spreads pull-out forces across three #6 x 3/4" screws, so the flange stays seated during normal closet use. The absence of pins means the flange aligns purely by its screw pattern, so installers work from predictable hole centers rather than engaging separate locating features.
The matte black finish helps maintain a unified appearance across multiple flanges and rods in the same space, so long runs of closet tubing present the same finish at each support position. The oval form factor keeps the rod profile consistent end-to-end, which supports straight runs along shelving or cabinet lines. The manufacturer part number 54113 51 055 uniquely identifies this exact screw-on rod support, so repeat orders can target the same flange for follow-up sections or matching retrofit work on an existing installation.
This screw-on rod support is made of a zinc alloy, which provides a rigid metal base at the rod ends and supports everyday hanging loads in closet or garage organization layouts.
This rod flange is oval, so it matches oval closet tubing and helps the rod sit securely in line with panels or walls along storage runs.
This rod support mounts with a screw-on pattern through 3 screw holes, so it fastens directly into the substrate at each flange position.
This oval flange is designed for #6 x 3/4" screws, so the screw diameter and length match the intended fastening depth into wood panels or similar materials.
This closet rod flange has no pins, so positioning is handled through the 3 screw holes when laying out the rod support on panels or walls.
This Pro Value Series screw-on rod support has a matte black finish, so it visually coordinates with matte black rods and other dark closet hardware.
This Pro Value Series screw-on rod support pairs an oval zinc alloy flange with a matte black finish, so closet tubing projects gain a defined mounting point and a consistent look. With 3 screw holes sized for #6 x 3/4" screws, each rod end seats in a stable, repeatable pattern on panels, partitions, or walls. The manufacturer part number 54113 51 055 ties this exact matte black oval flange to future jobs, so follow-on sections can match earlier closet rods and flanges work.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UF54113-48-091 Mfr# 54113 48 091 | Screw-On Rod Support, Dull Chrome Finish | ||||
Sold in: 1 Each | UF54113-47-054 Mfr# 54113 47 054 | Screw-On Rod Support, Dull Brass Finish | ||||
Sold in: 1 Each | UF54113-46-013 Mfr# 54113 46 013 | Screw-On Rod Support, Chrome Finish | ||||
Sold in: 1 Each | UF54113-49-084 Mfr# 54113 49 084 | Screw-On Rod Support, Dull Nickel Finish | ||||
Sold in: 1 Each | UF54113-53-085 Mfr# 54113 53 085 | Screw-On Rod Support, Oil-Rubbed Bronze Finish |