
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Screw-On Rod Support from the Pro Value Series is an oval closet rod flange that supports closet tubing in shelf, closet, and garage organization layouts. The flange is made of a zinc alloy, so the rod seat is formed from a hard metal that handles typical hanging loads in residential or light commercial closets. Its dull nickel finish provides a neutral, muted metal look that blends with common closet rods and other dull nickel hardware. The oval design matches oval closet tubing profiles, so the rod nests into a shaped support rather than resting on a flat plate. This support style helps maintain rod alignment along the run, which matters when you need doors, panels, or adjacent hardware to clear the hanging space consistently.
This screw-on rod support uses three screw holes as the sole fastening method, so the flange relies on those screws to secure the oval closet tubing to panels or supports. The holes are sized for #6 x 3/4" screws, so that screw size matches the intended interface between the flange and typical wood substrates. Using the specified screw size helps the head seat cleanly in the flange holes, which matters when you want the hardware to sit flush and the rod to register accurately in the oval opening. Because there are no pins molded into the flange, layout consists of positioning the part and driving the three screws, which keeps the mounting pattern straightforward during production or on-site installs.
This oval closet rod flange is suited to shelf, closet, and garage organization layouts that use oval closet tubing, because its opening is designed around that profile. The Pro Value Series classification places it within closet rods and flanges, so it fits naturally into closet hardware runs and storage assemblies built around that product group. The dull nickel finish coordinates especially well when your closet rods or adjacent hinges and pulls also use dull nickel, helping the visible support points read as part of one hardware family. In long closet runs, pairing matching flanges at each end of the oval tubing establishes a defined bearing point on each side, which supports the rod and creates a consistent hanging line across multiple cabinets or partitions.
The three-hole layout on this screw-on rod support gives you a repeatable fastening pattern, so you can mark and drill the same locations across a bank of closets to keep rods level from section to section. Because the flange has no pins, its final position is set entirely by the screw placement, which allows you to shift the hardware slightly during layout to align with face frames, partitions, or side panels. The zinc alloy body maintains a consistent oval opening under normal use, so when several supports are installed along a wall of closets, each rod end seats in the same geometry. That consistency helps reduce call-backs related to rods sitting out of level or binding against closet sides, since the shaped opening presents the same support surface every time. The manufacturer part number 54113 49 084 identifies this exact dull nickel, oval, three-hole version, so repeating that number in orders keeps replacement or additional flanges visually and dimensionally matched across future work.
The screw-on rod support is described as a closet rod flange with an oval profile, so it is intended to support oval closet tubing in shelf, closet, and garage organization layouts.
The rod support flange is made of a zinc alloy, which provides a rigid metal body around the rod opening for typical closet and storage applications using oval tubing.
The Pro Value Series screw-on rod support has a dull nickel finish, giving it a muted metallic look that coordinates with other dull nickel closet rods and hardware in the same project.
This oval closet rod flange has three screw holes and no pins, so the rod support is secured entirely by driving screws through the holes into the mounting substrate.
The web description specifies that the flange uses #6 x 3/4" screws, so that screw size is matched to the holes for fastening the rod support to wood panels or cleats.
Manufacturer part number 54113 49 084 designates this dull nickel, oval, three-hole screw-on rod support, so using it in orders keeps additional flanges visually and functionally consistent.
This screw-on rod support from the Pro Value Series combines a zinc alloy body, a dull nickel finish, and an oval opening tailored to closet tubing, so it fits directly into closet rods and flanges layouts. The three screw holes, sized for #6 x 3/4" screws, create a straightforward fastening pattern that supports stable rod installations across multiple sections. When a project calls for an oval closet rod flange identified by manufacturer part number 54113 49 084, this part number ties ordering, layout, and future repeat work to the same flange design for consistent results.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | UF54113-48-091 Mfr# 54113 48 091 | Screw-On Rod Support, Dull Chrome Finish | ||||
Sold in: 1 Each | UF54113-47-054 Mfr# 54113 47 054 | Screw-On Rod Support, Dull Brass Finish | ||||
Sold in: 1 Each | UF54113-46-013 Mfr# 54113 46 013 | Screw-On Rod Support, Chrome Finish | ||||
Sold in: 1 Each | UF54113-51-055 Mfr# 54113 51 055 | Screw-On Rod Support, Matte Black Finish | ||||
Sold in: 1 Each | UF54113-53-085 Mfr# 54113 53 085 | Screw-On Rod Support, Oil-Rubbed Bronze Finish |