Screw-On Rod Support, Oil-Rubbed Bronze Finish

Screw-On Rod Support For Closet Tubing

Screw-on rod support from the Pro Value Series provides an oval flange point for closet tubing, so a closet rod has a defined, stable bearing surface at the cabinet or wall. The flange is described as oval, which shapes the bearing contact around an oval rod profile, helping the rod seat consistently along its length. The flange is made of a zinc alloy, which gives the support a rigid metal body that stands up to the repeated loading typical in closet hanging applications. An oil-rubbed bronze finish on the flange changes the surface appearance to a dark, traditional look, so it visually coordinates with other oil-rubbed bronze components in the same closet run. This combination of zinc alloy body and oil-rubbed bronze finish turns a basic closet fitting into a part that carries both structural load and a coordinated design line through the project.

Closet Flange Details That Support Daily Use

• The flange is made of a zinc alloy, which provides a solid metal base that resists deformation under hanging loads over time, supporting a closet rod in regular open-and-close use.
• The product is described as a screw-on rod support, so its mounting is designed around screws, giving installers a direct mechanical connection between the flange and the substrate for predictable load transfer.
• The flange has three screw holes, which spreads the anchoring points across the body, helping distribute forces and reducing stress concentration at any single location on the mounting surface.
• The oval description of the closet rod flange indicates a shape intended to match oval closet tubing, which helps the rod nest in a repeatable position and supports consistent alignment along a run.
• An oil-rubbed bronze finish on the flange delivers a dark, muted appearance, allowing the hardware to visually blend with oil-rubbed bronze rods or adjacent trim elements in the closet.

Mounting And Screw-On Installation Characteristics

This screw-on rod support uses three screw holes as its mounting interface, so each flange can be firmly tied into wood or other suitable substrates using appropriately sized screws for the material. The three-hole layout means each support shares the hanging load across multiple fastener points, which is useful when closet rods carry concentrated weight in limited spans. Being a screw-on design, the flange body stays fixed once fastened, so the oval seat for the rod does not shift under side loading from daily use. The zinc alloy construction keeps the flange body rigid around the screw holes, which helps the holes stay true and support consistent clamping pressure from the fasteners over time.

How This Oval Closet Rod Flange Works

Oval Screw-On Flange For Closet Rod Runs

This closet rod flange is identified as an oval screw-on rod support in the Pro Value Series, so it serves as a termination or support point specifically for oval closet tubing. The SAP description states it is a closet rod flange, oval with three holes, oil-rubbed bronze, which confirms its role in closet rod assemblies where an oval profile is specified. The zinc alloy body carries the structural task of holding the rod in place, so side loads from hangers transfer through the metal flange into the mounting surface. The oil-rubbed bronze finish on the flange lets installers match this support with other oil-rubbed bronze closet hardware, keeping the visual line consistent across multiple rods or sections. Because it belongs to the Closet Tubing & Flanges category and Closet Rods & Flanges product class, it fits naturally into closet layouts that rely on tubing and flanges as the main hanging system.

Details That Support Alignment And Repeatable Results

The screw-on rod support configuration uses three screw holes without pins, so alignment is set by fastener placement rather than by separate locating pins, giving a clear, simple interface when positioning each flange on a jamb or panel. Three-hole mounting helps the flange resist rotation because the screws are spaced around the body, which matters when a loaded rod generates twisting or downward forces during use. The oval seating area defined by the flange geometry keeps an oval rod oriented in a consistent direction, so hangers and garments follow the same front-to-back projection along a closet section. The zinc alloy material provides a stable base around each screw hole, which supports consistent clamping pressure across multiple installations. Within the Wurth Baer Supply lineup, this Pro Value Series part sits as a standard closet rod flange, giving installers a predictable component when repeating the same closet configuration across several jobs or units.

Common Questions About This Rod Support

Selecting This Flange For Closet Projects

This screw-on rod support from the Pro Value Series pairs a zinc alloy body with an oil-rubbed bronze finish, giving closet projects both structural rod support and a coordinated dark appearance. The oval profile and three-hole mounting layout serve closet tubing systems that rely on repeatable alignment and stable fastening. When a job calls for an oval closet rod flange in oil-rubbed bronze, this part number 54113 53 085 offers a defined option within Wurth Baer Supply closet hardware lines.