Steel Table Legs For Adjustable Work Surfaces

Steel table legs from the Peter Meier Studio Series give you a load bearing capacity of 660 lb per leg, so a four-leg layout supports heavy work surfaces without overstressing a single point. The legs have a 2 inch diameter, which provides a solid footprint that resists wobble on typical table and workbench applications. Each leg height is 27-3/4 inches, positioning tops at a standard table range when mounted under typical work surfaces. The legs have 7 inches of adjustment built into the foot, letting you raise or lower each corner to compensate for floor variation or to fine-tune working height. A matching sleeve covers the extension, so the adjustment area stays visually clean once set. The steel construction and matte black finish support use where a sturdy, low-glare leg is preferred on furniture, tables, or workstations.

Key Studio Series Details That Support Your Build

• The Studio Series design provides steel table legs with a 660 lb load bearing capacity per leg, giving strong support for heavy tops, fixtures, or work surfaces in demanding shop or commercial layouts.
• A 2 inch diameter leg profile delivers a stable stance, which helps reduce flex and movement when the table is used for clamping, assembly, or other tasks that put lateral force into the structure.
• The 27-3/4 inch leg height creates a base suited to standard table-height projects, helping match adjacent work surfaces when you are laying out multiple tables in the same run.
• Built-in 7 inch foot adjustment gives wide range leveling, so you can handle sloped or uneven floors and still bring the top into a single plane across all four corners.
• The matching sleeve that covers the extension keeps the adjustable section concealed, maintaining a consistent matte black look even when legs are extended significantly.
• The matte black finish offers a neutral appearance that pairs well with a wide variety of tops while limiting reflected light on studio, office, or shop installations.

Installation Details For These Adjustable Table Legs

Each leg is part of the Peter Meier Studio Series, which uses separate brackets to attach the leg to the table, helping you create a rigid connection between the steel tube and the underside of the top. The legs have a 2 inch diameter, so they sit neatly against typical bracket footprints while keeping the connection compact. With 7 inches of adjustment built into the foot, you can dial in final height after the brackets are mounted, instead of relying on exact cutting or shimming of the structure. The 27-3/4 inch starting height works for standard table applications, and the integrated adjustment allows you to shift that height within the built-in range to align with surrounding work surfaces.

Using Studio Series Legs In Workspaces

Where These Steel Table Legs Perform Best

Peter Meier's Studio Series steel table legs are well suited to work surfaces and tables that see substantial static load, because each leg is rated at 660 lb load bearing capacity. In four-leg layouts, this rating supports heavy tops, tools, or equipment commonly used in woodworking, assembly, or studio environments. The 27-3/4 inch leg height ties directly to standard table-height projects, so desks, project tables, or light-duty benches can line up consistently in a room. With a 2 inch diameter, the legs provide a compact but sturdy appearance, fitting under tops without consuming excessive edge space. The matte black finish supports use in offices, studios, or shop spaces where a non-reflective, neutral look helps the focus stay on the work surface rather than the support structure.

Details That Support Level, Repeatable Results

The 7 inches of built-in adjustment in the foot let you correct for uneven floors while keeping the top at the target working height, which is especially useful when multiple tables must align in a continuous run. Because the adjustment happens at the foot, you can mount the brackets at the same reference dimension under each top and rely on the legs to fine-tune the final plane. The separate brackets that attach the leg to the table contribute to a consistent mounting method from project to project, helping repeat the same layout on multiple installations. The matching sleeve that covers the extension allows you to use the full adjustment range without exposing threads or transitions, so tables set at different heights still present a uniform matte black leg profile around a workspace.

Common Questions About These Camar Table Legs

Choose These Legs For Heavy, Adjustable Tables

The Peter Meier Studio Series steel table legs combine a 660 lb load bearing capacity per leg with a 27-3/4 inch starting height, giving a strong base for standard table projects. The 7 inches of built-in foot adjustment let you bring tops into plane even on uneven floors, while the 2 inch diameter profile and matte black finish provide a compact, professional appearance. For work surfaces, tables, or studio layouts that need both strength and height flexibility, these Camar steel table legs offer a straightforward way to support demanding tops with consistent mounting and clean lines.