Steel table legs 27-3/4 inch chrome Camar

Steel Table Legs 27-3/4 Inch Chrome For Worktops

Steel table legs 27-3/4 inch chrome from Camar are part of Peter Meier's Studio Series, so each leg is a steel support designed for work surfaces and tables that need solid vertical load capacity. The legs have a 2 inch diameter, which provides a stable footprint for typical work surface layouts while keeping a clean, compact profile at the floor and connection points. Each leg has a 27-3/4 inch height, which sets a standard table-height work surface before using the built-in adjustment range. The chrome finish gives the steel leg a bright, clean look that suits commercial or residential work areas where exposed supports are visible under the top. These legs are categorized as table legs for work surface and table applications, so they fit into projects where a rigid, straight support under a top is required.

Key Studio Series Details That Support Work

• Each Studio Series steel table leg has a load bearing capacity of 660 lb per leg, which lets a single leg support heavy work surfaces, fixtures, or equipment within that rating to reduce deflection at each support point.
• The 2 inch diameter leg tube concentrates strength in a compact footprint, so the leg fits under tight table edges or overhangs while still providing a solid vertical support column beneath the top.
• The 27-3/4 inch leg height places the work surface at typical table height once mounted, which helps maintain consistent ergonomics across multiple tables built from the same leg length.
• The chrome finish on the steel leg provides a bright, metallic appearance, which coordinates with other chrome elements in a space and presents a finished look when the legs remain visible.
• The legs are part of the Peter Meier Studio Series line, which groups these legs with other steel table supports designed for work surfaces and tables in similar commercial or residential applications.

Adjustment And Mounting Details For Installers

The legs have 7 inch adjustment built in the foot, allowing the overall leg height to shift within that range to compensate for floor unevenness or to change final work surface height within the available travel. This integrated adjustment is located at the foot, so height changes occur at floor level without altering the bracket position under the work surface. All legs come with separate brackets to attach the leg to the table, giving a defined connection point between the leg tube and the underside of the top. This bracketed connection simplifies layout because the bracket marks the exact mounting footprint for the leg on the work surface grid.

Using Camar Studio Series Legs In Real Projects

Where These Steel Table Legs Are Typically Used

These steel table legs from Camar are categorized under work surface and tables, so they are intended for projects where a flat top needs vertical leg support instead of a cabinet base. The 27-3/4 inch height positions them for standard table-height applications, such as work tables or desks built from loose tops. The 2 inch diameter suits installations where a slim but solid leg is preferred, such as open-plan workstations or freestanding tables along walls. The 7 inch adjustment built in the foot lets one leg design work across different finished floor conditions in a project, supporting consistent top height even when adjacent floors transition between materials.

Why These Adjustment And Capacity Details Matter

The load bearing capacity of 660 lb per leg allows installers to plan leg spacing under heavier tops while staying within the per-leg rating, which can reduce the total number of supports required under a long or deep work surface. The 7 inch adjustment in the foot gives flexibility during installation to refine height without cutting the leg, helping maintain a clean factory finish on the tube while still matching adjacent surfaces. Because the adjustment is built into the foot, fine-tuning height does not disturb the bracket-to-top connection, so the underside layout remains fixed as adjustments happen at the floor. The chrome finish on the steel leg adds a finished appearance that aligns with exposed-leg designs where the support becomes part of the visual layout rather than being hidden.

Common Questions About Camar Steel Table Legs

Selecting These Legs For Work Surface Projects

Camar Studio Series steel table legs, at 27-3/4 inch height with 7 inch adjustment in the foot, give a single-leg solution for many table-height work surfaces. The 2 inch diameter steel tube and 660 lb per-leg capacity support heavier tops within rating. The chrome finish matches designs where visible legs are part of the project layout. For projects built around steel legs rather than casework bases, these Studio Series legs align table-height support, adjustment, and visual finish in one component.